TEST: Eve Audio TS112

 In the end, quality prevails, or something like that you could summarize the career of the Berlin company Eve Audio in a very succinct statement. If you had asked me about this company almost 8 years ago, I would ultimately have had to pass, but my interest was piqued to the highest degree with my first test of this company's monitors. Eve Audio now has an impressive portfolio, from portable home recording nearfield monitors to powerful midfield “shooters”, which reach into the 1 KW range per loudspeaker box. It almost goes without saying that such a company also has appropriate subwoofers, which is why today we are taking a look at the “powerhouse” of the TS line, the EVE Audio TS112, which is the battleship in the deep bass range in terms of power output.

The conception of the EVE Audio TS112

The fact that a 12 inch woofer is installed in the EVE Audio TS112 gives an idea of the woofer's intended use. In contrast to live sound reinforcement, where a 12-inch speaker covers the low-mid range or even a classic 412 guitar cabinet, which uses a 12-inch speaker as a broadband speaker, with very few exceptions the same speaker size is the maximum you can expect in terms of subwoofer dimensions recording studio. In addition, the woofer has a peak power of almost 400 watts, so that the system can be positioned in the midfield area with the appropriate satellite equipment. If you are considering using a woofer and have a control room of up to approx. 20 square meters, you can actually save yourself the rest of this test report, as the physical conditions of the EVE Audio TS112 would exceed the possible uses in terms of the radiation behavior of a small control room.

As already mentioned, the playback is based on a single 12 inch speaker, which is clamped comparatively tightly due to the high power peaks, rests very firmly in its starting position due to the strong magnet and is equipped with a very massive surround. The membrane and dome are made of a very torsion-resistant material, which enables a frequency response of 24 - 300 Hz and a max. SPL @ 1m of 112 dB.

A major special feature of the Eve Audio subwoofer series, which is also present in the TS 112, is located on the underside of the housing. If you take a closer look at the pictures of the EVE Audio TS112, you will notice that the housing stands on four comparatively high feet, the unusual height of which immediately makes sense when you look at it from below. Perhaps some of the readers have noticed that the EVE Audio TS112 does not have a bass reflex opening. This “boost” solution from other manufacturers, which can sometimes generate a little wind noise when the loudspeaker is deflected higher, is achieved in the EVE Audio TS112 by means of a passive membrane, which is embedded horizontally in the bottom of the housing and of course has a certain amount of light for smooth operation Height required. Strictly speaking, the EVE Audio TS112 has two speakers, of which only one is actively operated.

  The back of the EVE Audio TS112

All connections of the Eve Audio TS112 are located on the back of the housing and are, as expected, in XLR symmetrical throughout, consisting of L / R - In / Out and LFE In / Out. A small extension of the labeling, but which makes it incredibly easier in practice, is the use of a regular and an upside-down labeling, where you can also read the labels if you lean over the woofer from the front to the back. Depending on the room, you may not always be able to walk around the woofer to carry out the correct cabling and in such situations a little thing like this is very helpful.


Furthermore, the woofer has 3 DIP switches, which can be used to activate various additional functions, such as:

Filter Lock: Securing the filters set on the front.
Volume Lock: Locks the volume set on the front.
Max. Input: Input sensitivity switchable between +8dBu and for studios with very high output levels +22dBu.

Finally, on the back of the housing there is the power plug, a voltage selector switch (220 - 240 V / 100 - 120 V) and the mains fuse.


The front of the Eve Audio TS112

The front of the Eve Audio TS112 is dominated by 2 rotary controls, which use a push function to guide you through the system's very extensive menu. In addition, 3 small LEDs provide information about different circuit states.

The lower rotary control takes over the function of the subwoofer volume in relation to the complete set and mutes the woofer using the push function. The LED ring around the controller works with an adapted mode of operation, which means that each LED has the following control depending on the volume:

-80dB (minimum) to -48dB: 2dB
-48dB to -20dB: 1dB
-20dB to 0dB (Maximum): 0.5dB

This useful logarithmic control allows a much more sensitive adjustment of the volume at high levels, while this fineness is not needed at low volumes. However, the sound control becomes really flexible when you use the upper control. The same controller takes over the overall control of the satellites and the woofer in terms of volume. First of all, it may be necessary to limit the satellites in the high pass so that the woofer is not put under too much strain on small satellites. Eve Audio recommends the crossover at 80 Hz, which is set as default. The same applies to the low pass of the woofer, which either transmits at 60 Hz up to 140 Hz or in LFE mode allows everything it can transmit.

In addition, the phase of the signal can be rotated if the room acoustics result in a disproportionately thin or booming sound due to phase cancellations. As with the other representatives of the TS class, Eve Audio has included an infrared remote control with the system, with which all functions can be controlled remotely from the control station. Especially when setting up the system for the first time, you can shorten the laborious “set-set-listen-get-up-go-change” repeat procedure and achieve significantly more effectiveness in a direct A/B comparison.

In practice

“That’s what I call a real deep bass,” these were the first words that came to mind when the first notes came from the EVE Audio TS112, but everything in order. Anyone who has previously worked with subwoofers with a diameter of up to approx. 8 inches may have to get used to the sound of the EVE Audio TS112, as the strengths of the woofer can only be measured on the second listening impression. Anyone approaching the situation expecting a higher volume due to the massive appearance of the woofer will be disappointed. At first impression, the subjective perception doesn't seem to differ that much from smaller woofers until you switch the woofer to standby and only hear the satellites alone.

Only now do you realize what the EVE Audio TS112 covers in the low and especially in the ultra-low bass range. Based on the strongly vibrating membrane, you could also visually see that a lot of air was being moved, but it was only in the A/B comparison that the woofer really came into its own. So how is it that this colossus is so incredibly subtle and discreet? In my opinion, the solution can largely be found in the passive membrane. As expected, the radiation behavior is still more or less circular, but the sound differs massively from a solution using a bass reflex opening. The sound of the EVE Audio TS112 is incredibly warm and unobtrusive, coupled with extreme headroom. If necessary, you can achieve the level of a real live sound system, which also allows you to test a club sound system at “real level” in the control room. In addition, there is a transmission that doesn't run out of steam even at 40 Hz, so that you can keep a perfect overview of the level, especially with bass-heavy music.

However, what should be very well coordinated is the crossover frequency with the satellites, which you should take a lot of time with. It can be assumed that if you use a 12-inch speaker in the bass range, you won't finish off with 4 or 5-inch speakers in the satellite range, as the "kink" in the linearity will be a little too strong. You can counteract the effect by having the woofer pass at 100 or 120 Hz, for example, but you should always be aware of the inertia of the bass speaker. Personally, I would complement this “jacket” with at least 6-inch, better still 8-inch bass speakers in the satellite range, which already provide a good bass foundation and add the EVE Audio TS112 as the ultimate bass controller.

Overall, you definitely have to give the EVE Audio TS112 the top rating, simply because there are no weak points in the system and the woofer holds up with incredible aplomb in all areas where a woofer can get sweaty. An absolutely top class subwoofer!


Conclusion

With the Eve Audio TS112, the Berlin company has a high-end studio subwoofer in its portfolio. The system has extreme power reserves, sounds incredibly discreet/subtle and, thanks to the passive membrane, produces a very unobtrusive basic sound with an outstanding deep bass reproduction, which extends right down to the very bottom of the frequency spectrum.

A professional subwoofer that consistently delivers even in large control rooms, hence top marks in all areas!

————————-

Additional Informations:

**Introduction**

Eve Audio is a German manufacturer of professional studio monitors. The company was founded in 2011 by Roland Stenz, and it is currently headquartered in Berlin. Eve Audio monitors are known for their high quality and accuracy, and they are used by a wide range of professional audio engineers, musicians, and producers.

**The Early Years**

Roland Stenz was born in Germany in 1963. He developed an interest in audio at a young age, and he began working in the audio industry in the early 1980s. Stenz worked for a number of different audio companies, including Sennheiser and Neumann, before founding Eve Audio in 2011.

**The Founding of Eve Audio**

Stenz founded Eve Audio with the goal of creating high-quality studio monitors that were affordable for professional audio engineers and musicians. The company's first product was the SC203 nearfield monitor, which was released in 2011. The SC203 was well-received by critics and audio professionals, and it helped to establish Eve Audio as a leading manufacturer of studio monitors.

**The Growth of Eve Audio**

Eve Audio has continued to grow and expand since its founding in 2011. The company has released a number of new products, including the TS112 subwoofer, the AM5 active monitor, and the Lynx 50 active monitor. Eve Audio monitors have been used by a wide range of professional audio engineers, musicians, and producers, including Grammy-winning engineer Andrew Scheps and multi-platinum producer Mike Elizondo.

**Eve Audio Today**

Today, Eve Audio is one of the leading manufacturers of studio monitors in the world. The company's products are sold in over 50 countries, and they are used by a wide range of professional audio engineers, musicians, and producers. Eve Audio is committed to providing high-quality, affordable studio monitors that help audio professionals achieve their creative goals.

**Eve Audio: A Timeline**

* 2011: Roland Stenz founds Eve Audio in Berlin, Germany.
* 2011: Eve Audio releases its first product, the SC203 nearfield monitor.
* 2012: Eve Audio releases the TS112 subwoofer.
* 2013: Eve Audio releases the AM5 active monitor.
* 2014: Eve Audio releases the Lynx 50 active monitor.
* 2015: Eve Audio celebrates its 5th anniversary.
* 2016: Eve Audio releases the Opal active monitor.
* 2017: Eve Audio releases the Sphere active monitor.
* 2018: Eve Audio releases the Studio 208 active monitor.
* 2019: Eve Audio celebrates its 10th anniversary.
* 2020: Eve Audio releases the EVO 207 active monitor.

**Eve Audio: A Look at the Future**

Eve Audio is a company with a rich history and a bright future. The company has come a long way since its humble beginnings in a small Berlin workshop. Today, Eve Audio is one of the leading manufacturers of studio monitors in the world. The company's products are used by a wide range of professional audio engineers, musicians, and producers. Eve Audio is committed to providing high-quality, affordable studio monitors that help audio professionals achieve their creative goals.

The company is constantly innovating and developing new products. Eve Audio is also committed to providing its customers with the best possible service. The company has a team of experienced and knowledgeable staff who are always happy to help customers find the right monitor for their needs.

**Conclusion**

Eve Audio is a company that is passionate about audio. The company is committed to providing audio professionals with the tools they need to create great music. Eve Audio monitors are known for their quality, accuracy, and affordability. They are the instruments of choice for a wide range of professional audio engineers, musicians, and producers.

TEST: Eve Audio TS107

 The general public only became aware of them with the establishment of the surround sound system; today they can be found in almost every recording studio that does not work in a midfield monitor or larger area. We are talking about subwoofers that cover the sub-bass range for control purposes, which for physical reasons cannot be covered by nearfield monitors. For testing we have the smallest representative of the Berlin manufacturer Eve Audio, which is called the Eve Audio TS107 and could cause a lot of interest with a large number of special features.

The special features of subwoofer operation

Even though most users are likely to be familiar with the special features of subwoofer operation, here is a brief introduction for interested newcomers. While huge discussions are sometimes made about the placement of near-field monitors and the associated optimization of the stereo triangle (and rightly so), the optimal placement of a subwoofer is approached in a comparatively relaxed manner. Even a placement beyond the stereo center is still viewed very loosely, depending on the reflection surface near the woofer, as long as the actual area of ​​application of the system is not ruined by an unfavorable phase problem.

Why is that? The main reason is that the human ear no longer perceives any spatial location below approx. 300 Hz. It is therefore negligible whether the subwoofer is in the middle or to the side of the room, unless the unfavorable geometry of the room causes standing waves or something similar. The stereo image is formed exclusively by the satellites of the nearfiled monitors, especially since in almost all woofers the stereo signal is summarized in mono.

The advantage of a subwoofer lies particularly in the space-saving variant, as high-quality woofer operation allows you to achieve a deep bass that can otherwise only be achieved with very good and expensive midfield monitors, which also require medium to very large control rooms in order to exploit their full potential can. The danger of using a woofer, on the other hand, lies in the unoptimized coordination with the satellites, which then leads to an undifferentiated reproduction of the bass range and worsens rather than improves the sound reproduction. A good subwoofer is therefore not only characterized by an outstanding sound, but also by as many setting options as possible to ensure optimal cooperation with the satellites.

The construction of the Eve Audio TS107

The Eve Audio company has a total of 4 subwoofers in its portfolio, with the Eve Audio TS107 with its 6.5-inch bass loudspeaker being the smallest variant in the series. The softly suspended yet magnetically tight speaker offers an output power of 100 watts and has an internal limiter. According to the manufacturer, the frequency range is 33 - 300 Hz, whereby the woofer with dimensions of 230 mm x 355 mm x 300 mm and a weight of only 8.2 kg can be described as very handy. The maximum SPL is @ 1m: 102 dB. Like all other Eve Audio products, the Eve Audio TS107 is perfectly manufactured and offers no cause for criticism.

What I noticed when unpacking the product were the unusually high and massive feet on which the Eve Audio TS107 stands. A look at the underside of the case provides the explanation. Instead of, as is usual with almost all subwoofers, Eve Audio does without the bass reflex channel and instead uses a passive membrane, which compensates for the movements of the front speaker and the associated compression of the internal air, as well as working as a kind of second speaker. The result is a significantly tighter and more defined bass than the bass reproduction via the bass reflex channel, which sometimes tends to “slouch”. The flow noise caused by occasional air turbulence is also eliminated.

The connection panel of the Eve Audio TS107

All connections of the Eve Audio TS107 are located on the back of the housing and, apart from the unbalanced RCA connection, which was set up for the Eve Audio SC203 master/slave system, are symmetrical in XLR, consisting of L / R - In / Out and LFE In/Out. Various additional functions can be activated via 4 DIP switches, such as:

Filter Lock: Securing the filters set on the front.
Volume Lock: Locks the volume set on the front.
Auto On/Off: Auto standby mode if there is no signal at the input for longer than 10 minutes.
Max. Input: Input sensitivity switchable between +8dBu and for studios with very high output levels +22dBu.

The power plug is also located on the back of the housing.

The front of the Eve Audio TS107

The front of the Eve Audio TS107 is dominated by 2 rotary controls, which use a push function to guide you through the system's very extensive menu. In addition, 3 small LEDs provide information about different circuit states.

The lower rotary control takes over the function of the subwoofer volume relative to the complete set and mutes the woofer using the push function. The LED ring around the controller works with an adapted mode of operation, which means that each LED has the following control depending on the volume:

-80dB (minimum) to -48dB: 2dB
-48dB to -20dB: 1dB
-20dB to 0dB (Maximum): 0.5dB

This useful logarithmic control allows a much more sensitive adjustment of the volume at high levels, while this fineness is not needed at low volumes.

However, things only get really interesting when you take a look at the upper control. The same controller takes over the overall control of the satellites and the woofer in terms of volume. First of all, it may be necessary to limit the satellites in the high pass so that the woofer is not put under too much strain on small satellites. Eve Audio recommends the crossover at 80 Hz, which is set as default. The same applies to the low pass of the woofer, which transmits at 60 Hz up to 140 Hz or, in LFE mode, allows everything it can transmit.

In addition, the signal can be phased if the room acoustics result in a disproportionately thin sound. As a real luxury in this price range, Eve Audio has included an infrared remote control with the system, with which all functions can be controlled remotely from the control room. Especially when setting up the system for the first time, you can shorten the laborious “set-set-listen-get-up-go-change” repeat procedure and achieve significantly more effectiveness in a direct A/B comparison.

In this video, company founder Roland Stenz explains how the Eve Audio TS107 works:


The Eve Audio TS107 in practice

I am lucky enough to be able to use one of the satellite pairs recommended by Eve Audio in the test in my broadcast studio, the Eve Audio SC204, which is recommended for both stereo and surround sound. You can view a corresponding test here.

I chose the default settings with crossover at 80 Hz as the basic setting and was immediately impressed. The resulting sound turns out to be extremely voluminous, always defined and very discreet in terms of intrusiveness. However, the bass was a bit too subtle for me, especially since the SC204 can no longer deliver very strong acoustics above 80 Hz without additional boost functions. I therefore decided to separate the woofer at 140 Hz, which resulted in an incredible improvement in the bass and low-mid range.

The sound in this setting can really only be described as excellent, especially when you take the dimensions of the components into account. Especially in the project or home recording studio area, where every meter of space is important, the combination of small satellites, e.g. B. the SC204 and the TS107 generate a very mature sound, which is extremely rare given these dimensions. The combination of 2x SC204 and a TS107 costs less than €1,000, which seems downright ridiculous for this sound output.

Just for fun, I also set the woofer to LFE mode, but this was at the expense of the stereo image with the satellites because there was too much overlap in the midrange. After all, a 6.5 inch speaker is fast enough to transmit low mids from the guitar and keyboard sector well.

Conclusion

With the Eve Audio TS107, the Berlin manufacturer led by Roland Stenz has achieved a really big success. The extremely handy subwoofer impresses with extensive setting options, perfect workmanship and sophisticated detailed solutions, such as: B. a passive membrane, across the board and is therefore at the forefront when it comes to big sound solutions in the smallest of spaces.

Be sure to test it out and take your time setting it up individually, it's worth it!

———————

Additional Informations:

Introduction:
In the realm of professional audio equipment, Eve Audio stands as a beacon of excellence, renowned for its precision-crafted studio monitors that deliver unparalleled sound quality and accuracy. Founded on a vision of pushing the boundaries of audio reproduction, Eve Audio has emerged as a leader in the industry, catering to the exacting demands of music producers, engineers, and enthusiasts worldwide. This article delves into the fascinating journey of Eve Audio, tracing its origins, milestones, and contributions to the world of studio monitoring.

Genesis of Eve Audio:
The story of Eve Audio begins in Berlin, Germany, in the early 21st century, amidst a thriving music scene pulsating with creativity and innovation. In 2011, a team of seasoned audio engineers and enthusiasts came together with a shared vision of revolutionizing studio monitoring technology. Fuelled by a passion for sonic excellence and a commitment to uncompromising quality, they embarked on a journey to create studio monitors that would redefine the standards of accuracy and transparency.

Founding Principles and Philosophy:
At the heart of Eve Audio's philosophy lies a relentless pursuit of sonic perfection. The company's founders were driven by a deep understanding of the importance of accurate monitoring in the audio production process. They recognized that every element of a recording – from the subtle nuances of tone to the spatial imaging of instruments – must be faithfully reproduced to ensure the integrity of the final mix. With this in mind, Eve Audio set out to develop monitors that would provide engineers with an unfiltered window into their music, allowing them to make informed decisions with confidence.

Innovation and Technology:
From the outset, Eve Audio differentiated itself through its unwavering commitment to innovation and technological advancement. Central to this ethos was the development of proprietary technologies that would set Eve Audio monitors apart from the competition. One such innovation was the incorporation of Air Motion Transformer (AMT) tweeters, which offered superior transient response and extended high-frequency reproduction compared to traditional dome tweeters. This breakthrough technology allowed Eve Audio monitors to achieve unparalleled clarity and detail in the upper register, capturing every nuance of the music with precision.

Another key innovation pioneered by Eve Audio was the implementation of DSP (Digital Signal Processing) technology in its monitors. By harnessing the power of digital processing, Eve Audio was able to fine-tune the frequency response, phase coherence, and dispersion characteristics of its monitors with unprecedented accuracy. This level of control empowered engineers to tailor the sound of their monitors to suit their listening environment and personal preferences, ensuring optimal performance in any studio setting.

Product Development and Expansion:
In the years following its founding, Eve Audio rapidly expanded its product lineup to encompass a wide range of studio monitors catering to various applications and budgets. The company's flagship SC series, featuring the renowned SC307 and SC407 models, garnered widespread acclaim for their exceptional accuracy, transient response, and wide frequency range. These monitors became the go-to choice for professional studios, mastering engineers, and discerning audiophiles seeking uncompromising sonic fidelity.

In addition to its flagship models, Eve Audio introduced the highly acclaimed TS series, which offered a more compact footprint without sacrificing performance. The TS108 and TS110 subwoofers complemented the TS series monitors, providing extended low-frequency reproduction and enhanced bass response for critical listening applications.

Eve Audio's commitment to innovation and excellence was further underscored by its collaboration with renowned audio engineers and producers in the development of signature models. The SC3070, co-designed with legendary producer Chris Lord-Alge, and the SC3070m, created in partnership with multi-Grammy-winning engineer/mixer Michael Brauer, exemplified Eve Audio's dedication to meeting the exacting standards of industry professionals.

Global Recognition and Acclaim:
As Eve Audio's reputation for uncompromising quality and precision spread, the company garnered widespread recognition and acclaim on the global stage. Its monitors found favor in leading recording studios, broadcast facilities, and mastering labs around the world, earning the trust of top-tier professionals in the audio industry.

Eve Audio's commitment to excellence was reflected in its numerous accolades and awards, including prestigious honors such as the TEC Award for Outstanding Technical Achievement in Studio Monitors. These accolades served as a testament to the company's dedication to pushing the boundaries of audio technology and setting new standards of excellence in studio monitoring.

Looking Ahead:
As Eve Audio looks to the future, its commitment to innovation, quality, and sonic excellence remains unwavering. The company continues to push the boundaries of studio monitor technology, exploring new frontiers in digital signal processing, driver design, and acoustic optimization. With a steadfast dedication to meeting the evolving needs of audio professionals and enthusiasts alike, Eve Audio is poised to continue shaping the future of studio monitoring for years to come.

Conclusion:
The journey of Eve Audio from its humble beginnings to its current status as a global leader in studio monitoring is a testament to the power of vision, innovation, and unwavering dedication to excellence. By combining cutting-edge technology with a deep understanding of the art and science of audio reproduction, Eve Audio has earned its place at the forefront of the industry, inspiring generations of musicians, engineers, and producers to create with confidence and clarity. As the company looks ahead to the next chapter of its evolution, one thing remains certain: the legacy of Eve Audio will continue to resonate in studios and listening rooms around the world, shaping the way we experience music for years to come.

TEST: ESP Will Adler Warbird

As a guitarist, it's not necessarily easy with the last name Adler. If the name in question is mentioned in a conversation with musicians, a respectful smile immediately spreads across the faces of drummers, especially if they have a connection to modern metal drumming. What is meant is the association with one of the current top 10 drummers in this segment, Chris Adler. Only a few people know his brother Will Adler, who was the rhythm guitarist in the band “Lamb Of God” and played with his brother in the same band for several years. Particularly due to its high level of popularity in the USA, the guitarist has several custom / signature models, of which we have by far the most expensive model, the ESP Will Adler Warbird Custom Shop Distressed, available for testing.

The concept of the ESP Will Adler Warbird Custom Shop Distressed

As with the other models made for Will Adler, the Warbird model is optically a Les Paul copy, which, however, differs significantly from the original in some details. The look of the test instrument in particular stands out due to its very distressed character and the huge “bone bird” sticker. However, the instrument has no claim to realistic wear and tear on the paintwork, as occurs with real vintage instruments; in fact, the paintwork was only very badly scratched.

The varnish was also artificially removed where no wear occurs during normal playing and the edges of the body binding, which should be smeared round at the armrest after such playing, are sharp-edged like those of a factory-new instrument. The hardware has been aged much more authentically. The pickup caps in particular have been beautifully trimmed to look old in terms of the uneven oxidation under and next to the strings, although here too the two caps were only copied and turned. A true vintage instrument will always have more wear and oxidation on the rear pickup cap of the bridge than that of the neck pickup.

What is a little strange given the massively used design of the instrument is the fact that, in contrast to the heavily scratched body and headstock, the neck is brand new and completely untouched. Somehow these two parts don't really fit together visually, but as always, it's all a matter of taste.

With a retail price of just under €7,500, the instrument is well outside the segment where one can speak of a realistic equivalent value even in metal; in fact, it is already very much in the enthusiast and fan section. But you should never forget that such visually unusual Custom Shop versions always represent a great advertising effect for the entire product range of an instrument type, i.e. even the lower-priced versions of the Warbird benefit enormously in terms of sales from the presence of an optical driving force.

The technical details

In the modern metal segment, there has been a clear shift in recent decades from the dominance of the solo guitarist to the appreciation of the rhythm guitarist. Just as current metal production is almost exclusively based on the principle of pressure, pressure and even more pressure, the current song material of many bands only focuses on powerful riff cascades, almost always in down or drop tuning. Where previously a wide carpet was rolled out for the soloist, who impressed the listener with an individual tone and extravagant scales in the high-speed range, today a guitar sound is usually generated that gets the maximum mass out of the high gain, sometimes so fat that it is already I have problems even being able to identify a bassist in the sound of a record production or a live show.

With the same in mind, Will Adler's tools are tailored to his function within his band, meaning the highest possible transparency even with maximum gain, good string separation within the riffing and a solid construction that can handle even harder attacks without intonation problems . The basis for this claim is the instrument's continuous, three-piece maple neck, which has glued-on mahogany wings and a maple top and, as expected, offers an extremely long sustain. Perfect for a strong solo tone, but unfortunately just a nice bonus in Will Adler’s role.

The fingerboard is made of ebony and has a scale length of 24.75". The shaping of the neck was dubbed “Thin U”, which sums it up quite well. The neck is quite slim and comparatively wide, fits well in the hand and will suit most players in terms of handling. All hardware was finished in “yellowed” gold, giving a sort of bronze feel to the base color scheme. Very nicely crafted, if the oxidation weren't so absolutely uniform, the look would be very close to real vintage hardware. If my interpretation is correct, small “warbirds” were used as fingerboard inlays.

6 Sperzel mechanics with locking function were used as tuners, which fulfill their function absolutely evenly and smoothly. Normal pins were used as belt pins, which will probably be exchanged very quickly by the user for locking mechanisms. In keeping with his function as a rhythm guitarist, a vibrato system was omitted; instead, the guitar comes with a classic bridge and a stop tailpiece. In order to avoid Gibson's legal letters, they didn't even try to use something bell-shaped as a truss rod cover, but instead opted for an oversized, cut-off "reverse bell".

Two Fishman Fluence pickups are used, which are manufactured according to Will Adler's specifications. Unfortunately, it was not possible to find out whether these are technical changes that also influence the Klamg, or whether it is just the visual aspect that creates the signature character. Like all Fishman Fluence pickups, the pickups here have 2 different sound characteristics, with one being slightly more active and the other being more passive. These are switched using a push/pull potentiometer, in this case it is the tone control on the guitar. In addition, each pickup has its own volume control.

The power supply for the pickups is a special feature. As with other manufacturers who offer their instruments in the high price segment, the pickups are powered by a battery, which is charged via the combination of USB plug / mobile power supply. A good thing, which reduces battery waste, although the built-in battery will of course have to be disposed of at some point.

The ESP Will Adler Warbird Custom Shop Distressed in practice

It is questionable whether the ESP Will Adler Warbird Custom Shop Distressed will ever be connected to a clean channel, which actually turns out to be a shame. Depending on the setting used, the instrument can also generate very pearly, clear sounds in the various pickup constellations, especially if you use passive emulation of the pickups.

But it is also a fact that every orchestra leader or even the buddies from the local jazz quartet would get green pimples if they dared to appear at a public performance with an instrument that has these optical qualities. In return, anyone who deals with truncated half-waves will at least be left with a respectful “Oha” as soon as you take the instrument out of the supplied case.

How much of the unusual finish will reach the audience in the dark stage light is another matter, but in terms of sound, the ESP Will Adler Warbird Custom Shop Distressed delivers exactly what the optics promise. The entire construction delivers a differentiated sound even at maximum gain, combined with excellent vibration behavior. The touch more maple generated by the continuous neck also ensures a touch more freshness in the basic sound than the mostly low-mid-based sound generated by the classic mahogany neck / mahogany body combination.

Conclusion

With the ESP Will Adler Warbird Custom Shop Distressed, the Japanese company delivers an instrument that acoustically and, above all, visually meets almost all the trademarks that a high gain protagonist should fulfill. Anyone who likes to spend time in modern metal realms will find this instrument an excellent tool that shines with clean string separation, great assertiveness and outstanding sustain.

The fact that the artificial aging of the instrument only serves coolness factors and in no way corresponds to real wear and tear should be noted just as coolly and be happy for the enthusiastic owner. After all, this is not about an authentic blues tool, but rather a visually and acoustically outstanding instrument for the ambitious metalhead. In addition, anyone who can lighten their wallet by almost €7,500 for a single instrument is a very happy person anyway.

———————-

Additional Informations:


ESP Guitars is a Japanese manufacturer of electric guitars, basses, and accessories. The company was founded in 1975 by Hisatake Shibuya, and it is currently headquartered in Tokyo. ESP guitars are known for their high quality and craftsmanship, and they are used by a wide range of professional musicians, including James Hetfield, Kirk Hammett, and Dave Mustaine.

**The Early Years**

Hisatake Shibuya was born in Japan in 1937. He developed an interest in guitars at a young age, and he began building his own instruments in his teens. In 1975, Shibuya founded ESP (Electric Sound Products) as a small workshop in Tokyo. The company initially specialized in repairing and modifying guitars, and it also sold imported guitar parts.

In the early 1980s, ESP began to produce its own line of guitars. The company's first guitars were based on popular Fender and Gibson models, but they quickly developed their own unique sound and style. ESP guitars were soon adopted by a number of Japanese metal bands, and they quickly became the go-to brand for heavy metal guitarists.

**The Rise of ESP Guitars**

In the late 1980s and early 1990s, ESP guitars began to gain popularity outside of Japan. The company's signature models, such as the LTD Viper and the ESP Horizon, were embraced by metal guitarists around the world. ESP also began to produce guitars for a number of high-profile artists, including James Hetfield, Kirk Hammett, and Dave Mustaine.

**ESP Guitars Today**

Today, ESP is one of the leading manufacturers of electric guitars in the world. The company offers a wide range of models, from entry-level guitars to high-end custom instruments. ESP guitars are used by a wide range of musicians, from metalheads to blues players.

ESP is also a major force in the guitar industry. The company owns a number of other guitar brands, including LTD, Edwards, and Schecter. ESP also produces a wide range of guitar accessories, including pickups, strings, and effects pedals.

**The ESP Legacy**

ESP Guitars has had a major impact on the world of music. The company's guitars have been used by some of the biggest names in rock and metal, and they have helped to define the sound of modern music. ESP guitars are known for their quality, craftsmanship, and performance, and they are sure to continue to be popular for many years to come.

**ESP Guitars: A Timeline**

* 1975: Hisatake Shibuya founds ESP (Electric Sound Products) in Tokyo.
* 1983: ESP begins producing its own line of guitars.
* 1984: ESP opens its first US office in Los Angeles.
* 1986: ESP introduces the LTD Viper, one of its most popular models.
* 1990: ESP introduces the ESP Horizon, another popular model.
* 1996: ESP opens a custom shop in Japan.
* 2000: ESP introduces the ESP Edwards line of guitars.
* 2002: ESP introduces the ESP Schecter line of guitars.
* 2005: ESP celebrates its 30th anniversary.
* 2010: ESP opens a new factory in Indonesia.
* 2015: ESP celebrates its 40th anniversary.
* 2020: ESP celebrates its 45th anniversary.

**ESP Guitars: A Look at the Future**

ESP Guitars is a company with a rich history and a bright future. The company has come a long way since its humble beginnings in a small Tokyo workshop. Today, ESP is one of the leading manufacturers of electric guitars in the world. The company's guitars are used by a wide range of musicians, from metalheads to blues players. ESP is also a major force in the guitar industry. The company owns a number of other guitar brands, including LTD, Edwards, and Schecter. ESP also produces a wide range of guitar accessories, including pickups, strings, and effects pedals.

ESP Guitars is a company that is always looking to the future. The company is constantly innovating and developing new products. ESP is also committed to providing its customers with the best possible service. The company has a team of experienced and knowledgeable staff who are always happy to help customers find the right guitar for their needs.

ESP Guitars is a company that is passionate about music. The company is committed to providing musicians with the tools they need to create great music. ESP guitars are known for their quality, craftsmanship, and performance.

TEST: ESP Eclipse QM

 Some test instruments seem to have an air of something special about them, simply because there is hardly any information material about the instrument. So I'm holding the ESP Eclipse QM TEASB Duncan in my hands and both the look and a few brashly played chords suggest that it's a very special instrument. I am excited.

The construction of the ESP Eclipse QM TEASB Duncan

“Another Paula copy” I can already hear the first complainers saying and yes, you can't dismiss the fact, the instrument is actually a very clear one, apart from a few details that were changed out of fear of the Nashville lawyer armada Copy of one of the largest trademarks in the field of electric guitars. But wait, some points don't seem to correspond to the larger model. Let's take a closer look.

Let's start with the typical features of a Les Paul, e.g. B. the body, which, as expected, was made of mahogany. According to internet research, the body is “chambered”, meaning that cutouts have been made in the body to reduce the weight. As a rule, I am not a fan of these measures, especially since Gibson has made a big mistake with this measure in recent years, as the resonance behavior of instruments of this design has deteriorated significantly. With the ESP Eclipse QM TEASB Duncan, however, this behavior cannot be observed, especially since the instrument still weighs just under 4 kg. Without the hollows we would probably have arrived in the good old early eighties, where a Paula weighed over 5 kg. I love these menhirs, but that's another topic.

Normally, a glued neck made of mahogany would now appear on the screen, but this does not match the grain of the neck base at all. And in fact, the instrument is based on a continuous, three-part neck, which sits in a pocket throughout, so that the bottom of the ESP Eclipse QM TEASB Duncan is still around 1.5 cm continuous and not the body wings as with comparable instruments were completely glued on. By the way, the body is in one piece, as far as the grain pattern suggests. The result of this unusual construction is an almost unbelievable sustain, which even the cutouts in the body cannot harm.

Another special feature of the ESP Eclipse QM TEASB Duncan is the shaping of the body, which significantly increases the playing comfort compared to the hard edges of a Paula in the belly fat area. The ceiling used is an exceptionally beautiful, two-part bookmatched maple top from the brand “Wölkchenahorn”, which allows for an almost three-dimensional resolution depending on the angle of incidence of the light. The same look was continued on the top of the headstock. The fingerboard is made of ebony and offers the classic short scale length of 24.75 inches / 629 mm with 22 frets from the JESCAR FW57110 XJ Stainless brand. In order to increase the stability of the neck against the infamous “skull base fracture” compared to the saddle due to the structural weakening caused by the truss rod, the classic “knubble” was created at the transition to the headstock.

Curved block inlays are used as fingerboard markings and in order to underline the origin of the otherwise mainly made in Japan, the characters “ESP USA” were embedded in the 12th fret, which also explains the ambitious price of around €4,200. No savings were made on the hardware either; instead, in addition to locking mechanisms from Sperzel, they were used as a bridge/tailpiece. The currently very popular TonePros T3BT Locking TOM with T1Z Locking Tailpiece is used. The strap pins were once again provided by Schaller, the corresponding counterparts for the strap are included with the instrument. Everyone has to decide for themselves whether the bones of dead animals will still have to be used as saddles in 2020.

The pickups used were Seymour Duncan pickups, unfortunately I couldn't find out which model was used. Due to the price segment, it could be Alnico Pro-II humbuckers, but this statement is only an estimate. The instrument has 2 volume controls and a tone control, the latter of which is available as a push/pull version and the humbucker can be switched to single coil. The instrument comes with an upscale molded case.

In practice

I admit, there are rarely moments when I, as a tester, get excited before the instrument has even been connected to the amplifier, but here we have such a case again. It's incredible what sustain the instrument delivers even in the dry dock. Whether single tones or chords, the extremely fast response and the almost endless decay behavior immediately captivates me, especially since my personal main instruments throughout my life have been either Les Pauls or comparable instruments such as: B. my current Framus Panthera custom guitars were, or are. Even if you were to install the cheapest Far East pickups on this instrument, it would be difficult to mess up the excellent basic sound of the instrument.

The playability of the ESP Eclipse QM TEASB Duncan, as well as the weight reduction, have once again been trimmed towards “comfort”, i.e. the neck profile has been optimized towards a “Thin U”, which clearly benefits the instrument’s comfort. ESP has really cleverly implemented this approach. Normally, a solid body and a correspondingly “meaty” neck have an effect on the sustain behavior of the instrument. However, if the construction already exhibits such high-quality vibration behavior, you can still remove some of the wood fibers from the instrument to make it easier to handle.

The factory settings of the instrument were so well done that nothing had to be readjusted. The set of strings was a standard 10 (010 - 046), which suits the instrument well. In general, I am of the opinion that classical guitar types should be equipped with at least a set of 10, the dynamics and volume will thank you for it. 009 or similar should be reserved for the Floyd Rose Dive Bomb camp.

I was curious to see whether the ESP Eclipse QM TEASB Duncan could also convey the excellent, unamplified sound through the loudspeaker and experienced one or two surprises. To be honest, in my opinion the nameless Seymour Duncan pickups can't quite maintain the construction quality, which surprises me even more since I've always been a big SD fan. Both the neck and bridge pickups offer a much tighter treble response than one would generally expect from an LP copy. The result is not bad, but offers a comparatively “bitchy” sound in humbucker mode. Whether you like this basic sound is purely a matter of taste, so I would like to ask every interested musician to form their own opinion.

What didn't convince me, however, was the single coil circuit of the pickups. Of course, the output power of a single coil pickup is usually lower than that of a humbucker, but the amount of power lost here is quite striking. It feels like 50% of the signal falls by the wayside and not only leaves a significant drop in volume, but unfortunately also an associated thin and pointed sound that does not do justice to the quality of the instrument.

In any case, nobody would think of joining a chic tribute band with an instrument of this design, but in this case, in my opinion, various points come together that stand in the way of high-quality single coil operation. The choice of wood, the short scale length and the somewhat unfortunate choice of pickup don't really make this sonic extension shine. It would therefore be worth considering whether this circuit should not be discarded entirely, especially since the reduced circuit effort would benefit the general sound of the instrument.

Otherwise, the ESP Eclipse QM TEASB Duncan impresses across the board with the vibration properties already mentioned. The solo tone swings out very nicely and can score particularly well in the crunch and lead areas. Higher levels of distortion up to the high gain range are possible, but are not necessarily one of the best things about the ESP Eclipse QM TEASB Duncan.

Conclusion

With the ESP Eclipse QM TEASB Duncan, the Japanese manufacturer offers a top-class instrument in terms of vibration technology. The sustain and general vibration behavior are of the highest quality, the workmanship is flawless, and the appearance is appealing.

Depending on the area of application, the customer may need to check the pickups based on their personal taste, which sound by no means bad, but very special in the overall context.

———————

Additional Informations:

Introduction:
In the dynamic world of musical instruments, few companies have left as indelible a mark as ESP Guitars. Renowned for their exceptional craftsmanship, innovative designs, and unwavering dedication to musicians' needs, ESP has carved out a significant niche in the guitar market. However, the journey of ESP Guitars from a humble repair shop to an international icon is a story rich in history, perseverance, and passion.

Early Beginnings:
The origins of ESP Guitars can be traced back to the bustling streets of Tokyo, Japan, in the late 1960s. It was during this time that Hisatake Shibuya, a skilled luthier with a deep appreciation for quality craftsmanship, established a small shop called Electric Sound Products (ESP). Initially, the company focused on providing custom guitar repairs and modifications, catering to the burgeoning rock and roll scene in Japan.

The Rise of Customization:
As the demand for customized guitars grew, ESP quickly gained a reputation for its meticulous attention to detail and willingness to accommodate the unique preferences of musicians. This commitment to customization became the cornerstone of ESP's identity and set them apart from other guitar manufacturers of the time. Musicians flocked to ESP for bespoke instruments tailored to their specific playing styles and aesthetic preferences.

Collaborations with Iconic Artists:
One pivotal moment in ESP's history came in the late 1970s when the company forged partnerships with influential Japanese musicians, including Japanese rock icons such as Char and KISS frontman Paul Stanley. These collaborations not only elevated ESP's profile but also solidified its reputation for quality and innovation within the music industry.

Expansion and International Recognition:
Throughout the 1980s, ESP continued to expand its reach both domestically and internationally. The company's reputation for crafting high-quality instruments caught the attention of musicians around the world, leading to an increase in demand for ESP guitars beyond Japan's borders. This prompted ESP to establish distribution networks in key markets such as the United States, Europe, and Southeast Asia.

One of the defining moments for ESP's international recognition came in the mid-1980s when Metallica's lead guitarist, Kirk Hammett, began using ESP guitars. Hammett's endorsement of ESP solidified the brand's association with heavy metal music and propelled its popularity among metal guitarists worldwide. Other notable artists who endorsed ESP during this period include George Lynch of Dokken and Bruce Kulick of KISS, further cementing ESP's status as a premier guitar manufacturer.

Innovations in Design and Technology:
ESP's commitment to innovation has been a driving force behind its success over the years. The company has continually pushed the boundaries of guitar design and technology, introducing groundbreaking features that cater to the evolving needs of musicians.

One such innovation was the introduction of the ESP Horizon series in the late 1980s. The Horizon series showcased ESP's expertise in crafting high-performance guitars with sleek, modern designs. These guitars featured innovative hardware, such as Floyd Rose tremolo systems and EMG pickups, which appealed to shredders and heavy metal guitarists seeking maximum playability and tone.

In addition to its electric guitars, ESP also made significant strides in the development of bass guitars. The ESP Precision Bass and Jazz Bass models became popular choices among bassists for their exceptional tone, playability, and durability.

ESP's commitment to innovation extended beyond instrument design to include advancements in manufacturing techniques and materials. The company invested in state-of-the-art facilities and employed cutting-edge production methods to ensure consistent quality and precision in every instrument.

Diversification and Acquisitions:
As ESP Guitars continued to grow, the company diversified its product offerings to cater to a broader range of musicians. In addition to its high-end custom shop instruments, ESP introduced more affordable lines such as the LTD series, which offered similar quality and craftsmanship at a lower price point.

In 2014, ESP Guitars made a strategic move to expand its presence in the acoustic guitar market by acquiring Takamine, a renowned Japanese acoustic guitar manufacturer. This acquisition allowed ESP to leverage Takamine's expertise in acoustic guitar craftsmanship while maintaining its commitment to quality and innovation.

Environmental and Social Responsibility:
In recent years, ESP Guitars has also demonstrated a commitment to environmental and social responsibility. The company has implemented eco-friendly practices in its manufacturing processes, such as using sustainable materials and reducing waste. Additionally, ESP has supported various charitable initiatives and community projects aimed at promoting music education and supporting aspiring musicians.

Conclusion:
The evolution of ESP Guitars from a small repair shop to a global powerhouse is a testament to the company's unwavering dedication to craftsmanship, innovation, and meeting the needs of musicians. With a rich history spanning over five decades, ESP continues to push the boundaries of guitar design and technology while maintaining its commitment to quality and excellence. As the company looks towards the future, it is poised to remain a leading force in the world of electric guitars, inspiring musicians and shaping the sound of generations to come.

TEST: ESI uniK Plus

 OK, I admit it, I'm a fan of product care. In my opinion, it simply makes more sense to optimize a product that is running well in the second or third attempt and to respond to customer suggestions than to repeatedly bring new product series onto the market in comparatively short time intervals. Those responsible for ESI probably thought of the same and brought the ESI uniK 05 plus, the successor to the normal 05 series, onto the market.

In order to justify the four letters behind the product name to the user, much more than just optical cosmetics was carried out, but everything in order.


construction

The monitor looks pretty. The combination of the colors black and copper in combination with the matt, rounded front is definitely pleasing to the eye. The type designations and the white lettering on the back are also in this color, which creates a touch of corporate identity. Tastefully! The box comes with 4 rubber feet, which are not only intended to decouple the housing, but can also adjust the angle of inclination upwards and downwards using appropriate screw axes.

ESI really doesn't make it easy for itself, as the monitor series, with a retail price of around €189 and Chinese production, is in a broad segment of competitors in the budget class. In order to stand out from the competition, you need a lot of special features to get the buyer's attention. With the dimensions (W x H x D): 190 x 265 x 210 mm and a weight of just under 4.4 kilograms, they are still in the normal range and the beautiful, copper-colored 5 inch Kevlar woofer is not too noticeable either very out of the norm, but wait, the tweeter doesn't just differ visually from the usual dome tweeters.


extravagant tweeter

Anyone who feels briefly reminded of the competitor ADAM Audio is ahead. As with the aforementioned competitor, the ESI uniK 05 plus uses a ribbon tweeter, the equivalent of a ribbon microphone. As with the microphone version, the tweeter is characterized by extremely good impulse behavior due to its very low mass. Unfortunately, the tweeter also shares the same problems as a ribbon microphone. Both are known for their high sensitivity to external mechanical influences. In order to protect the tweeter as comprehensively as possible, ESI not only placed a steel grille on the front, but also installed a fine-meshed net, which is also intended to counteract moisture and fine dirt.


upgraded back

In order to reinforce the difference to its predecessor, ESI has dedicated the Plus variant in particular to optimizing the room acoustics. The product has an unusually large selection of optimization points in this price range, starting with a two-band tone control, which has an amplification factor of +/- 5 dB each. The preamplifier, on the other hand, even allows +/- 14 dB, which means the system can be adapted to pretty much any output voltage. What is really unusual, however, is the “Character” control, which allows you to seamlessly raise or lower the entire frequency spectrum from approx. 50 Hz by +/- 6 dB. The manufacturer refers to these control paths as “Smooth” or “Bright”

Due to the recessed arrangement of the potentiometers, all settings are made using a mini slotted screwdriver, which was included in the box. Applicable signals can be fed in via XLR or TRS via the combination socket, which should be sufficient for 90 percent of all applications. The switchable standby function saves energy and puts the box into sleep mode after several minutes without a signal. A ground lift is also available for ground loops or inadequate power supply abroad.

ESI has come up with another special feature for the reflex opening. The opening again on the top edge of the housing can be completely closed with a tightly fitting foam plug. This is to ensure that the speaker is not prone to the infamous booming frequencies in the bass range when placed near a wall, or even worse in a corner of the room. Interesting detailed solution.


Practice

According to the enclosed operating instructions, the ESI uniK plus has a frequency response of 49 Hz - 25 kHz. Even if the values do not allow for a real evaluation, you can still see the system's preferences. No one expects “real” bass from a 5-inch bass speaker without subwoofer support, but you should keep in mind that in this case an approximately linear bass transmission only begins at around 70 Hz. Therefore, please do not give in to the misconception that the system can reproduce bass guitars, kick drums or electronic instruments in the bass range in a balanced manner.

I also strongly advise against misusing the two-band tone control as a booster in the bass range; unfortunately the limits of physics cannot be exceeded. Increasing it using the bass control only resulted in more choking in the impulse behavior, which even the fast and stiff Kevlar speaker couldn't absorb. If you don't succumb to this malpractice, you will get a well-defined bass tone that can be located very well, but nothing more. The system cannot develop a real punch.

There are no complaints to note in the midrange. Rather, I liked that the crossover frequency of 3.2 kHz was well chosen and that the infamous center hole did not appear in the crossover. In terms of sound, the box tends to produce a tight reproduction without too much harshness, but also without the flattering effect that is reserved for the next higher price ranges. The stereo imaging of the system, on the other hand, is excellent; if the speakers are positioned optimally, nothing is left to be desired in terms of depth and location behavior.

Yes, and then there is the highlight of the system, the treble reproduction of the ribbon tweeter. I would like to do this again show an analogy to the ribbon microphone. Just as the sound of the microphone type of the same name divides users into two camps, this type of tweeter will also cause never-ending discussions. As expected, the tweeter is characterized by extremely fast reproduction and is also largely responsible for the very good stereo positioning.

In return, the tweeter sounds significantly sharper than the average dome tweeter, which allows the user to reach for the high-mid control relatively quickly and also reduces fatigue while listening. A considerable amount of listening time is necessary to get used to the system's frequency curve. Unfortunately, it is not the “whispering” highs above 10 kHz that would possibly lead to excessive shimmering, but rather the “biting” high-mids above the 4 kHz limit, to which the human ear is already hypersensitive.

However, if you are aware of these points and have adjusted your hearing accordingly, you can work with the ESI uniK plus in a very practical way. The plus points clearly outweigh the negatives and make the system a good second/third listening device or a high-quality first listening device at the DAW station in the project studio.



Conclusion

With the ESI unik plus, the system receives a high-quality upgrade compared to its predecessor. A lavish sound control in combination with several well thought-out detailed solutions makes the visually sophisticated box a real asset in the project studio.

Everyone has to decide for themselves whether they like the sound of the ribbon tweeter, but the comparatively harsh tweeter reproduction is matched by extreme impulse fidelity and excellent stereo positioning.

Definitely worth checking out in person!

—————————-

Additional Informations:

ESI Audio, also known as Electronic Sounds Inc., stands as a testament to the ingenuity and entrepreneurial spirit that drives the world of professional audio. Since its inception, ESI has been committed to delivering cutting-edge audio solutions that empower musicians, producers, and audio engineers to unleash their creative potential. Let's embark on a journey through the captivating history of ESI Audio, tracing its origins, key milestones, and enduring legacy in the realm of pro audio.

**Founding Years:**

The story of ESI Audio begins in the late 1990s, amidst a burgeoning digital revolution that was reshaping the landscape of music production and recording. In 1999, a team of passionate audio enthusiasts and engineers came together with a shared vision: to develop innovative audio interfaces and solutions that catered to the evolving needs of the modern music industry.

Founded in Germany, ESI Audio quickly established itself as a pioneering force in the realm of digital audio technology. Drawing upon the country's rich tradition of engineering excellence and precision craftsmanship, the company set out to redefine the standards of audio quality, performance, and affordability.

**Innovations and Breakthroughs:**

From the outset, ESI Audio distinguished itself through a relentless pursuit of innovation and excellence. The company's early product offerings, including audio interfaces, MIDI controllers, and studio monitors, garnered acclaim for their superior sound quality, robust build, and intuitive design.

One of ESI's notable contributions to the industry was the development of the renowned U24 XL USB audio interface, which quickly became a staple in home studios and professional setups alike. With its compact form factor, low-latency performance, and versatile connectivity options, the U24 XL exemplified ESI's commitment to delivering practical, user-friendly solutions that didn't compromise on audio fidelity.

**Expansion and Global Reach:**

As demand for ESI's products grew, the company expanded its reach beyond the European market, establishing distribution networks and partnerships across the globe. With offices and representatives in key markets such as North America, Asia, and South America, ESI Audio solidified its position as a leading player in the international pro audio landscape.

The company's commitment to customer satisfaction and support further enhanced its reputation, earning the trust and loyalty of musicians, producers, and audio professionals worldwide. Whether it was providing technical assistance, software updates, or user guides, ESI demonstrated a steadfast dedication to ensuring that its customers could make the most of their audio solutions.

**Diversification and Adaptation:**

In response to the ever-evolving needs of its clientele, ESI Audio diversified its product portfolio to encompass a wide range of audio solutions tailored to different applications and environments. From portable audio interfaces for mobile recording to studio-grade monitors for professional mixing and mastering, ESI's catalog continued to expand, offering something for every stage of the audio production process.

Moreover, ESI remained at the forefront of technological advancements, embracing emerging trends such as wireless connectivity, digital signal processing, and immersive audio formats. By staying ahead of the curve and anticipating industry trends, ESI ensured that its products remained relevant and cutting-edge in a rapidly evolving market.

**Legacy and Future Outlook:**

Today, ESI Audio stands as a beacon of innovation, quality, and reliability in the world of professional audio. With a diverse lineup of products that cater to the needs of musicians, producers, and audio engineers across the globe, ESI continues to push the boundaries of what's possible in sound recording, production, and playback.

As the company looks towards the future, it remains committed to its core principles of innovation, excellence, and customer satisfaction. With an unwavering focus on advancing technology, expanding its product range, and maintaining the highest standards of quality, ESI Audio is poised to continue shaping the future of audio for years to come.

In conclusion, the journey of ESI Audio is a testament to the transformative power of passion, creativity, and ingenuity. From its humble beginnings to its current standing as a global leader in pro audio, ESI's story serves as an inspiration to aspiring innovators and audio enthusiasts alike. With a legacy built on innovation, excellence, and a relentless pursuit of perfection, ESI Audio remains firmly entrenched in the annals of audio history, leaving an indelible mark on the world of sound.

TEST: Epiphone JC LP Custom

 How times change. While the earlier signature instruments of established artists were usually the most expensive instruments in the respective manufacturer's portfolio and were often manufactured by the most talented Luthiers in the company group, the way of thinking and manufacturing has changed in this regard in recent years. almost diametrically opposite. The classics in the portfolio are now often manufactured in the manufacturer's home country, while the signature models are often manufactured in the Far East at cheaper conditions. Similar to the ESP / LTD constellation, for example, the big name Gibson has the subsidiary Epiphone, which was once one of the big names in the jazz sector, but has now been established as the mainstay in the budget class for Gibson. As a test instrument we have the signature model of the “Alice In Chains” guitarist Jerry Cantrell, which is made in China and is called the Epiphone Jerry Cantrell Prophecy LP Cus.

The concept of the Epiphone Jerry Cantrell Prophecy LP Cus

As a subsidiary of Gibson, the trademark Epiphone is, as expected, allowed to use all optically protected elements of the parent company, so that the Les Paul version hardly differs visually from the original in terms of its curves, apart from the independent headstock. Only a few small details were changed in favor of the slightly modified Signature version, but these only show a marginal difference.

The instrument, which is kept in “Bone White” throughout, including the binding, is visually very striking and, like any other white instrument, has the advantage that any colored irradiation from stage spotlights is absorbed 1:1. Ultimately, you have to decide for yourself how much you like the color scheme, but the instrument at least benefits from the truism “If You Wear Black, You Have To Play White”. Personally, I find the discrepancy between the “old white” binding and the very light “bone white” a bit too strong, as the binding always looks a bit “dirty”, but as I said, it's all a matter of taste.

As expected, the basic construction of the Epiphone Jerry Cantrell Prophecy LP Cus was largely taken over from the original Les Paul, so the dimensions of the body, scale length, etc. are identical. What is immediately noticeable, however, is the comparatively low weight of the guitar, which at around 3.4 kg is significantly less than the weight of a classic LP. In the info sheet for the guitar, the negative word “Chambered” is avoided; instead, the term “Ultra Modern” is used for “Weight Relief”, which in my opinion probably suggests that the body is hollowed out. As long as the vibration behavior does not suffer as in the Chambered versions of the first generations, there is nothing wrong with reducing the weight, otherwise here too, it is up to you as you please.

To list the respective Les Paul configurations in detail here again would mean carrying owls to Athens, as every musician has probably held a Paula in their hands at least once, or should hold it at least once, in order to understand the significance of what happened almost 70 years ago the most famous signature model of all time (yes, the Les Paul is a signature model!). The choice of wood, scale length, construction and feel correspond to a large extent to a white Les Paul Custom from the eighties, which, however, came without any weight reduction at the time and often nibbled at the 5 kg mark and more.

The differences to the original Les Paul

But apart from the weight, what exactly are the differences to the original Les Paul so that the AIC guitarist's special requests were fulfilled. Let's start with a detail in the form of Grover Locking Rotomatic tuners, which, in conjunction with the Graph Tech saddle, enable smooth and clean tuning. The “Circle in Diamond Custom Inlays” and the, let’s say very “feminine” in a kind of Signed Roundhand designation of the guitar on the truss rod cover are just as individual.

The biggest difference, however, is probably in the area of the pickups, where the Epiphone Jerry Cantrell Prophecy LP Cus consistently placed emphasis on active alignment. Once again the Fishman Fluence pickups were used, which are now used very frequently, especially in the hard'n'heavy sector, and sometimes have a strong impact on the chair leg of the previous top dog EMG. Which pickups you ultimately like better is once again a matter of taste, but many users often mention the possibility of two different voicings within the pickup network as a pleasant feature.

In order to be able to use the comprehensive tone control of the pickups without losing the classic tone control of the Les Paul in the form of 2x Tone and 2x Volume, they chose “2 Volume with Push/Pull Coil Splitting, 2 Tone with Push/Pull Pickup “Voice Switching” was chosen, in which, in addition to the voicing selection of the individual pickups, the pickups can also be switched to sigle coil operation via an individual coil tap. Unfortunately, three of the four potentiometers show a comparatively indirect control, i.e. a small moment always passes before the potentiometer axis engages in the housing after it has been rotated. Not really a big problem, but it takes some getting used to for guitarists who like to use the volume control to control the interaction with their amplifier.

In order to be able to operate the preamplifiers of the active pickups, the Epiphone Jerry Cantrell Prophecy LP Cus also requires a 9V block, which must be placed in a way that is as easy to maintain as possible. To avoid the “battery wrapped in foam stuffed into the electrical compartment” solution of earlier days, Epiphone uses a snap lock inside the electrical compartment cover, which unfortunately doesn't convince me in several ways. On the one hand, the construction appears comparatively “plastic-like”, and on the other hand, the solution “a drawstring with a battery that can be clamped tightly plus a freely dangling 9V battery clip” is a solution that, in my opinion, is not worthy of a signature model, unless this solution This happened at the express request of the guitarist, which of course I cannot judge.

What also seems a little strange in my opinion is the fact that the instrument was delivered without a 9V battery. Maybe it was just forgotten, maybe those responsible are worried about a leaking battery, but at least the inclusion of a 9V block should be part of the instrument's standard equipment. At least there is plenty of space for it, as the Epiphone Jerry Cantrell Prophecy LP Cus is delivered in a high-quality, black hardshell case.

The Epiphone Jerry Cantrell Prophecy LP Cus in practice

Even when played in an unamplified state, you can see that the weight reduction does not have a negative influence on the vibration behavior of the instrument. The guitar has a subtly hollow sound character, but that shouldn't be viewed in a judgmental way. However, the instrument is not optimally set up at the factory, which is noticeable in the buzzing E1 strings above the 10th fret. Nothing that you can't fix yourself with a few simple steps, but if you're going to put a sticker saying "Handcrafted In China" on the back of your neck, I think you have to deliver accordingly when it comes to craftsmanship.

The strong neck feels pleasant in the hand and offers very good playing comfort, especially when things need to get a little more hearty. The instrument's attack and decay behavior is good and the response is quick. Due to its low weight, the guitar is easy to handle and will be a lot of fun for all users who are looking for the most comfortable stage feel possible.

In terms of sound, the Epiphone Jerry Cantrell Prophecy LP Cus offers an excessive range of sounds for an LP modification due to the pickup construction, which goes well beyond the 3-way options of a typical LP standard or custom. Although as the level of distortion increases, only nuances in the sound spectrum are perceptible, but in the clean and crunch area, a comparatively large number of tonal variations can be created with the two voicings and the single coil circuit, although, as with all coil taps in the humbucker area, the single coil circuit is not the same Can offer character like a pure single coil pickup, which is the case with every humbucker of this type.

If you are looking for the typical low-mid range of a classic Les Paul, possibly thickened with EMG pickups, you should check the Epiphone Jerry Cantrell Prophecy LP Cus in advance to see whether it meets your sound expectations. The guitar undoubtedly sounds very good, but the sound is in slightly different regions than you are used to from a Paula. This can offer advantages or disadvantages depending on what you are looking for.

Conclusion

With the Epiphone Jerry Cantrell Prophecy LP Cus, the Gibson subsidiary has a model in its ranks that has a slightly different sound than what the appearance suggests. Due to the pickup and wooden construction, the guitar offers a high-quality basic sound, which is very well established in the sound and ensures a high degree of independence, but is clearly different from a classic Les Paul.

—————————-

Additional Informations:

Epiphone Guitars stands as a cornerstone in the world of musical instruments, revered for its rich history, innovative designs, and enduring legacy. From its humble beginnings in the late 19th century to its current status as a global guitar powerhouse, Epiphone has played an integral role in shaping the landscape of modern music. Let's delve into the captivating journey of Epiphone, tracing its origins, pivotal milestones, and the iconic instruments that have cemented its place in the annals of guitar history.

**The Early Years:**

The story of Epiphone traces back to the bustling streets of Smyrna, Ottoman Empire (now Izmir, Turkey), where Greek founder Anastasios Stathopoulos began crafting instruments in the late 19th century. Initially specializing in the construction of traditional Greek lutes and violins, Stathopoulos honed his skills and soon expanded his repertoire to include mandolins, banjos, and eventually guitars.

In 1903, Stathopoulos immigrated to the United States and settled in New York City, where he continued his craft under the brand name "The House of Stathopoulo." The company quickly gained recognition for its superior craftsmanship and innovative designs, attracting a growing clientele of musicians seeking high-quality instruments.

**The Rise of Epiphone:**

In 1928, Anastasios' son, Epaminondas "Epi" Stathopoulos, took the reins of the family business and embarked on a mission to propel the company to new heights. Under Epi's visionary leadership, the company underwent a rebranding, adopting the name "Epiphone" as a tribute to its founder and embracing a newfound focus on electric guitars.

During the 1930s, Epiphone made significant strides in guitar innovation, introducing groundbreaking models such as the Electar Series, which featured some of the earliest commercially successful electric guitars and amplifiers. These instruments showcased Epiphone's commitment to pushing the boundaries of guitar design and performance, earning the admiration of musicians worldwide.

**The Golden Age:**

The post-war era heralded a golden age for Epiphone, marked by a period of unprecedented growth and creativity. In 1957, Epiphone caught the attention of industry giant Gibson Guitar Corporation, which recognized the company's potential and acquired it as a subsidiary. This partnership proved fruitful, as Epiphone gained access to Gibson's resources and expertise while maintaining its distinct identity and product line.

Throughout the 1960s, Epiphone produced a diverse range of instruments, including iconic electric guitars like the Casino, Sheraton, and Riviera, which became synonymous with the sound of influential artists such as The Beatles, The Rolling Stones, and Oasis. These guitars garnered widespread acclaim for their distinctive tones, sleek designs, and impeccable craftsmanship, solidifying Epiphone's reputation as a premier guitar manufacturer.

**Revitalization and Modern Era:**

In the late 20th century, Epiphone experienced a revitalization under the stewardship of Gibson, as the company renewed its focus on quality and innovation. Epiphone's product lineup expanded to include a wide range of electric and acoustic guitars, basses, and accessories, catering to the diverse needs of musicians across genres and skill levels.

In recent years, Epiphone has continued to evolve and innovate, introducing new models that combine classic aesthetics with modern features and technology. From the reissue of vintage classics to the development of cutting-edge designs, Epiphone remains at the forefront of guitar craftsmanship, ensuring that musicians of all backgrounds have access to instruments that inspire creativity and elevate performance.

**Legacy and Impact:**

Epiphone's enduring legacy extends far beyond its catalog of instruments; it embodies the spirit of innovation, craftsmanship, and musical excellence. Countless artists have relied on Epiphone guitars to shape their sound and leave an indelible mark on music history, testament to the company's enduring influence and relevance.

As Epiphone continues to chart new territory and inspire future generations of musicians, its legacy remains firmly entrenched in the fabric of guitar culture. From its humble beginnings in a small workshop to its current status as a global brand, Epiphone Guitars stands as a testament to the power of passion, perseverance, and the enduring magic of music.

TEST: Engl Savage MKII

 It is now the strongest German name in the amplifier sector when it comes to top-class high gain, perhaps even worldwide. We're talking about the all-tube amplifier manufacturer ENGL, which has built up a name for itself with a consistent model policy and a constantly open ear for customers, which stands for German global work and excellent sound on all Hard'n'Heavy stages worldwide. The manufacturer's top parts in particular are very popular with customers in the signature variations of Steve Morse or Ritchie Blackmore as well as in the series models Powerball, Invader and Savage. The latter has now also received an update and is available for testing under the name Engl Savage 120 MkII. So then, pushed the 4x12 forward and off we went!

The structure of the Engl Savage 120 MkII

Even though the Engl company offers classic 2-channel models, the company has become known for its 4-channel cars, which also include the Savage model. Once again, this model belongs to the all-tube league that Engl always pursues, even though the rectification is done using transistors. Right from the start, I notice the unusual power rating of 120 watts with only 2 output tubes. It is well known that the built-in 6550 power tubes deliver more steam than the still popular EL34, but up to now I only knew about 30 watts per piston. The fact that Engl tickles 60 watts per tube out of the glass bulbs is rather unusual.

With the dimensions (W x H x D): 71 cm x 27 cm x 29 cm and a heavy weight of 22 kg, it takes a little effort to balance the head on a full stack, but due to the massive appearance and the Excellent workmanship also comes with a corresponding value. In general, the head, which is manufactured in Germany, leaves an excellent impression in terms of feel. All components are of the highest quality and no compromises have been made here.

The difference from its predecessor

In contrast to many other competitors who put the MkII stamp on their products and like to leave it primarily to optical extensions, the Engl Savage 120 MkII is a completely new amp. In addition to a new output transformer and mains transformer With the exception of the standby and power functions, all switching functions are now controlled via MIDI, which makes the amplifier extremely flexible in terms of sound variety. The new version also has a noise gate, which many high gain users have been waiting for during breaks in the game. The Power Tube Monitor System and the Serial Amp Control socket are now also in the MkII version.

Operating the Engl Savage 120 MkII

Anyone who stands in front of the panel of a “large” Engl amplifier for the first time may wince for a moment because of the head's diverse switching and control functions. However, if you take a little time, you will quickly understand the logical concept behind the multitude of Detect controls and switches. The 4 channels each share 2 different tone controls, although there is also an unusual midrange control on the Clean and Crunch 1 channels. Here you can choose between 2 different midrange controls, one of which works more narrow-band and the other more broad-band. In addition, each channel has different sound designers in the form of Hi / Low, Bright, Preshape, Contour, Rough / Smooth switches, all of which have a massive impact on the subsequent sound.

On the back, in addition to the 5 output sockets (1 x 16 Ohm, 1 x 8 or 2 x 16 Ohm, 1 x 4 or 2 x 8 Ohm), 2 different FX loops catch the eye. In addition, according to the amp concept, 2x MIDI, a power amp line out and 2 footswitch sockets.

The Engl Savage 120 MkII in practice

As one of the few manufacturers with a focus on distorted sounds, Engl has managed to leave a sonic trademark in almost all of its models. Like many other products in-house, it is the combination of very tight compression, combined with a very tasteful scoop, which also characterizes the basic sound of the Engl Savage 120 MkII. Engl succeeds very well in not developing the scoop into the infamous center hole that other manufacturers with a similar basic direction strive for. Rather, the sound always remains transparent, no matter how hard you turn the controls or press the switches.

Let's start with the Clean Channel, whose basic tendency can be varied very nicely using the different pressure switches. It really depends on which instrument is used on the amp. The choice of pickups in particular allows for a very wide tonal spectrum in collaboration with Hi/Low, Bright and Contour. The sound in this is neutral, balanced and does a decent job.

The huge field of different crunch sounds begins with the first truncated half-waves, which never end in their tonal variation. Please keep in mind that all settings can be saved via MIDI and that you can do this alone, for example. For example, in the Crunch channel you can easily access 6-7 completely different sounds using the foot switch. Very few all-tube amplifiers offer such variety.

Depending on the switch position, Crunch 2 is already heavily featured in the lead area. Here, already carried leads can be performed with enough sustain. This is where the classic Engl voicing comes into play for the first time, the subtly hollowed out sound, which still has enough midrange definition to assert itself in the all-important range between 600 Hz - 1.5 kHz. Here too, many fundamentally different sound examples can be set using the various presets.

A special feature in this case is the rough/smooth switch. Pressing it brought a small question mark on my forehead. I initially expected a change in frequency grading for the tone control, but all of the tone controls on channels 3 and 4 suddenly lost a lot of effectiveness. The explanation for this is that by activating this switch, the bass and treble are reduced significantly, which corresponds to a midrange boost. This circuit is based on a circuit from the Engl Straight, in which the tone control was completely removed from the signal path. The sonic result is a very nasal sound that invites blues lines or retro arrangements. This sonic “outlier” further increases the flexibility of the head immensely.

Then, we now come to the sonic area in which the Bavarians have dethroned pretty much every competitor in recent years or at least share the seat with them, the high gain sector. Even the first sounds on this channel leave no doubt as to what the Engl Savage 120 MkII's flagship discipline is. The sound is heavily scooped and pushes like hell in the bass range without the sound drifting into muddy. Depending on the line-up, it's important to keep an eye on the bass control or deep switch, otherwise the guitarist will be so harsh on the bass player that there will be overlaps in the frequency spectrum. What blows your cap off when playing solo in the rehearsal room or in the studio can, depending on the band constellation, lead to a sound that is too bass-heavy, even in a trio.

However, with this in mind, the Head offers one of the best modern metal sounds the scene has to offer. Highly compressed without pumping, the amp hangs on the right hand like a textbook. If you have good palm muted technology, everything your hard rock/metal heart desires is possible with this channel, from classic rock to ultra djent chatter.

It should be clear to anyone who has dealt with this matter that a very high gain factor is inevitably accompanied by a high background noise. This is where the newly introduced noise gate can show its strengths, although with the appropriate gain settings you also have to use the appropriate noise gate settings, i.e. the gate sometimes has to be turned down hard in order to stop the noise when the volume control is turned down during breaks in the game. It does this job well, but in my opinion it could close a little softer.

Conclusion

The Engl Savage 120 MkII is another excellent all-tube amp from the Bavarian amp manufacturer on the market. Thanks to its four-channel design, which enables an extremely extensive variety of sounds thanks to a large number of pressure switches, the head offers almost all tonal shades that a modern rock and heavy amp can offer. The lead channel alone will move any modern metal fan to tears and justifies the purchase of the amplifier, which even seems comparatively cheap given that it is “Made in Germany” and costs just under 2,300 euros.

———————————

Additional Informations:


Engl Amplification is a German manufacturer of guitar amplifiers and cabinets. The company was founded in 1983 by Hermann Engl, who is still the company's CEO today. Engl amps are known for their high quality, versatility, and powerful sound. They are used by a wide range of guitarists, from beginners to professionals, and are popular in a variety of musical genres, including rock, metal, and blues.

**Engl Amp Product Range**

Engl offers a wide range of amplifiers, from small practice amps to large stage amps. Their product range can be divided into the following categories:

* **Engl Topteile** (Engl: amplifier heads)

Engl offers a variety of amplifier heads, from the compact and affordable Fireball 25 to the powerful and versatile Powerball II. Engl heads are known for their high-gain capabilities, but they also offer a wide range of clean and crunch tones.

* **Engl Combos**

Engl also offers a variety of combo amps, which combine an amplifier head and speaker cabinet in a single unit. Engl combos are a popular choice for guitarists who need a portable and powerful amp.

* **Engl Cabinets**

Engl offers a variety of speaker cabinets to match their amplifiers. Engl cabinets are made from high-quality materials and are designed to deliver the best possible sound.

**Engl Amp Features**

Engl amps are packed with features that make them ideal for a variety of guitarists. Some of the most common features include:

* **Engl High-gain channels**

Engl amps are known for their high-gain channels, which are perfect for playing rock, metal, and other heavy music genres.

* **Engl Clean and crunch channels**

Engl amps also offer a variety of clean and crunch tones, making them suitable for a variety of musical styles.

* **Engl Effects loops**

Engl amps feature effects loops, which allow guitarists to add their favorite effects pedals to their signal chain.

* **Engl Direct outs**

Engl amps also feature direct outs, which allow guitarists to connect their amps directly to a recording console or PA system.

**Engl Amp Artists**

Engl amps are used by a wide range of guitarists, from beginners to professionals. Some of the most famous Engl users include:

* **Alexi Laiho** (Children of Bodom)
* **Dimebag Darrell** (Pantera)
* **James Hetfield** (Metallica)
* **John Petrucci** (Dream Theater)
**Zakk Wylde** (Black Label Society)
Andre Olbrich (Blind Guardian)

**Engl Amp Reviews**

Engl amps have received positive reviews from critics and guitarists alike. They are praised for their high quality, versatility, and powerful sound. Here are a few examples of Engl amp reviews:

* **Guitar World** magazine gave the Engl Powerball II a 4.5 out of 5 rating, calling it "a versatile and powerful amp that is perfect for a variety of musical styles."
* **Premier Guitar** magazine gave the Engl Fireball 25 a 4 out of 5 rating, calling it "a great choice for guitarists who are looking for a small, affordable, and powerful amp."

**Engl Amp Prices**

Engl amps are priced in line with other high-quality amplifiers. The price of an Engl amp will vary depending on the model and features. For example, the Engl Fireball 25 has a street price of around $500, while the Engl Powerball II has a street price of around $2,000.

**Where to Buy Engl Amps**

Engl amps are available for purchase from a variety of authorized dealers around the world. You can also purchase Engl amps directly from the Engl website.

**Conclusion**

Engl Amplification is a leading manufacturer of high-quality guitar amplifiers. Engl amps are known for their versatility, powerful sound, and wide range of features. If you are looking for a high-quality amp that will meet your needs, Engl is a great option.

TEST: Engl Ironball R606 20 SE

 As much as the big all-tube heads of the top league are considered the ultimate in cultivated sound, they have lost a lot of their presence in the live sector in recent years. You can often only find them in the area of committed hobby musicians who are not above dragging the heads from the rehearsal room onto the stage or in the upper league of artists who have a corresponding crew that takes care of the artist's technical needs takes care. The majority of “working musicians” either rely on digital simulations of the analog original, or they work with lunchbox amps, which can hold a candle to their big brothers in terms of quality and sound. Today's test is about such a "little brother"; we have the Engl E606 Ironball Head 20 SE for testing.

The construction of the Engl E606 Ironball Head 20 SE

Introducing the Engl company in the field of full-tube amplifiers would mean carrying owls to Athens. Hardly any other German company has achieved such great worldwide popularity in this segment as the company based in Tittmoning, Germany, along with the claim to be able to compete with all the big names across the pond or the English Channel.

The Engl E606 Ironball Head 20 SE is an extended version of the Ironball Head, which is based on the same basis as the regular Ironball head, but comes with a greatly expanded range of functions, with Engl attaching great importance to both the classic Engl full tube sound to reproduce, as well as to meet modern requirements in the simulation / emulation area. In order to do justice to this “Swiss army knife” philosophy, the entire front and especially the back area is used and is packed with a variety of control and switching options.

The amp sits in a solid, high-quality metal housing, which sits on four soft and high rubber feet, which in turn are high enough to place the amp above any cabinet carrying handle, which may be located on the top of the cabinet. A black grille on the front of the housing reveals 4x ECC 83/12 AX7 preamp tubes and 2x EL 84 power tubes. The power of the head is given as 20 watts, which means the amp is at least half as loud as a 100 watt all-tube top, which is already at home in the “infernal if necessary” volume group.

All controls, both on the front and back of the housing, are slightly set back so that objects impacting on the surface do not cause one or more potentiometers to be immediately torn off. To transport the amp, there is a solid metal carrying handle on the top of the housing, which can be folded up if necessary. The amp is also delivered in a high-quality soft bag, which has an additional pocket for cables etc.

The Engl E606 Ironball Head 20 SE is a two-channel all-tube amp in which the two channels share a common 3-band tone control. In order to make the lead channel even more flexible, the amp has an additional presence control in this channel. Furthermore, a lead volume control offers the volume gradation between the two channels, while a master volume control regulates the overall volume of the amp. All controls are marked with a bold white line, so that you can easily read the respective control position even in poor lighting conditions. Otherwise, at the end on the right side there is a power switch and a standby switch, so far so clear.

The total of eight mini switches appear more interesting, which are located between the master controller and the standby switch and each provide information about their range of functions using a small LED. In addition to a store switch, which is particularly important in the MIDI setup mentioned later, the remaining seven switches offer the following switching options:

M.V.B. (Master Volume Boost): a second master volume, for example to switch between rhythm and solo playing.
Reverb: Reverb activation, by holding the switch for two seconds the reverb tails are activated or deactivated
Delay: Delay activation, by holding the switch for two seconds the delay tails are activated or deactivated
Gain Boost: the name says it all
Clean Lead: the manual switch between the two channels
FX Loop: Activation/deactivation of the serial loop path
Noise Gate: Activate/deactivate the noise gate

The back of the Engl E606 Ironball Head 20 SE

Anyone who is already impressed by the front of the amplifier with its diverse control options in a comparatively small space will rub their eyes in surprise when they look at the back. Every square centimeter is really used here to provide the user with an extensive set of rules. First, the questions that some readers have probably already asked themselves regarding the delay, reverb and noise gate controls will be answered. The areas of delay mix, delay time, feedback, reverb amount and noise gate threshold can be adjusted using a total of 5 rotary controls.

Furthermore, the internally installed Powersoak can also be accessed here, which offers the setting options Full Power, 5 Watt, 1 Watt and Speaker Off. To address it again directly, if the amp is to run in IR mode without a box connected, the same switch MUST BE switched to “Speaker Off”, as without the internal load resistor the amp will be damaged within a very short time. This is a full tube amp, which, in contrast to solid state amps, is short-circuit proof, but dies immediately under load! In this context, careful attention must be paid to the correct impedance selection for the speakers. Engl enables the connection of a single 8 ohm box, a single 16 ohm box (the amp gives you this ohm leeway) or two 16 ohm boxes, which means that a total impedance of 8 ohms must not be undercut. Therefore, check carefully whether you have a full stack with 2 pieces. You have 8 ohm speakers at the start or maybe you have used the 4 ohm input on your stereo 412 cabinet!

In addition to a serial FX loop, the amp also offers a jack-shaped footswitch input for channel changing using traditional cabling. But if you want to use the full range of sound management, you are guaranteed to operate the Engl E606 Ironball Head 20 SE with a MIDI baseboard, which can be connected via MIDI In. Unfortunately, the amp does not offer MIDI Out/Thru, i.e. H. if you have an additional MIDI instrument, e.g. For example, if you want to connect a Multi FX, the amp must be the last link in the MIDI chain. With a third-party MIDI bar, you can switch off the phantom power of the Engl footbar using a switch if necessary.

Finally, the Engl E606 Ironball Head 20 SE offers 8 pieces. IR Cabinets, which are both on the built-in D.I. Box, as well as on the adjustable headphone output, can be charged via a USB port and can be switched whether the signal should be pre or post with regard to the FX section. Finally, at the bottom left is the cold appliance socket along with a fine fuse that is accessible from the outside.

The Engl E606 Ironball Head 20 SE in practice

With dimensions (W x D x H): 335 mm x 217 mm x 142 mm, the Engl E606 Ironball Head 20 SE requires a little more space than many other lunchbox amps, especially in depth, but the carrying handle is perfectly placed so that it can be used Despite the weights of the different transformers, the amp has no list whatsoever. Even if the weight of 8 kg could make a Kemper user sweat (just kidding!), the amp can be transported without any effort and can also be easily lifted onto a full stack.

I can imagine that some readers are worried about a two-channel design, along the lines of “only two sounds”. I can take this worry away from every user as long as you keep two points in mind. On the one hand, with the Gain Boost you have an additional sound option for both channels, and on the other hand, the old Jeff Beck principle can be implemented to perfection with this amp. Jeff Beck opened up the preamp to the max for his gain sounds and controlled all of his crunch sounds with the volume control on his guitar.

Exactly this principle can be implemented excellently with the Engl E606 Ironball Head 20 SE. Both channels are designed to be comparatively “hot” and depend very well on the guitar’s volume control. With a hard attack and appropriate pickups you can coax the clean channel into a subtle crunch, but at the same time you can create completely clean sounds even with the volume turned down. The same applies to the lead channel, which converts the well-known Engl high gain sound into a subtle crunch using the volume control. Both channels have a very high sound quality and offer an excellent basic sound at all volumes. It is also interesting that, despite the EL84 equipment in the power tubes, the amp sounds significantly more “massive” than some other competitors with the same equipment.

In summary, an excellent amp that scores with compact dimensions, an outstanding sound and great flexibility in all relevant areas!

Conclusion

With the Engl E606 Ironball Head 20 SE, the German manufacturer has an excellent lunchbox amp in its portfolio, which is also completely manufactured in Germany and thus secures jobs. A complete absence of any negative points is offset by an armada of positive points such as sound, concept, workmanship and flexibility, so if you are looking for a compact and powerful all-tube amp, you have come to the right place with this amp.

Be sure to check it out!

————————-

Additional Informations:

When it comes to crafting premium amplifiers for musicians, few companies can match the expertise and reputation of Engl Amps. Established in 1983 by Horst Langer, Engl has consistently pushed the boundaries of sound engineering, delivering high-quality amplification solutions sought after by professional musicians worldwide. With a commitment to innovation, craftsmanship, and sonic excellence, Engl has amassed a diverse product range tailored to meet the needs of guitarists across various genres and playing styles.

**Classic Series:**

The Classic Series embodies the timeless essence of tube amplification, delivering warm, vintage tones reminiscent of iconic rock and blues eras. Models like the Classic 50 and Classic 100 showcase Engl's meticulous attention to detail in circuit design and component selection. These amplifiers feature EL34 power tubes for rich harmonic saturation, along with responsive EQ controls that allow players to sculpt their desired tone with precision. Whether it's creamy overdriven textures or crisp clean tones, the Classic Series captures the essence of classic rock tones with modern reliability.

**Powerball Series:**

For guitarists craving high-gain firepower and versatility, the Powerball Series stands as a formidable choice. Engineered for sonic aggression, models like the Powerball II and Powerball 100 offer blistering distortion capabilities without sacrificing clarity and definition. Four independent channels provide a wide spectrum of tones, ranging from sparkling cleans to searing lead tones, making it an ideal companion for metal and hard rock players. Features such as built-in noise gates and adjustable power amp damping ensure tight, articulate response even under the most extreme gain settings, catering to the demands of modern heavy music.

**Fireball Series:**

The Fireball Series embodies simplicity and raw power, catering to the needs of players who prefer straightforward operation without compromising on tone. Models like the Fireball 25 and Fireball 100 deliver muscular tube-driven tones with a focus on punch and aggression. With two-channel layouts optimized for rhythm and lead playing, these amplifiers excel in delivering tight low-end response and cutting through dense mixes with ease. Enhanced features such as onboard reverb and adjustable bright switches offer additional tonal flexibility, making the Fireball Series a go-to choice for players seeking no-nonsense performance.

**Ironball Series:**

Compact yet mighty, the Ironball Series packs a punch in a portable format, making it an ideal companion for gigging musicians and recording artists. Models like the Ironball E606 and Ironball 20 deliver authentic tube tone in a lunchbox-sized package, perfect for studio work or stage performances where space is limited. Despite its small footprint, the Ironball Series doesn't compromise on sound quality, offering a wide range of tones from pristine cleans to high-gain mayhem. Features such as built-in power soak and line output make it a versatile tool for both live and studio applications, appealing to players seeking portability without sacrificing tone.

**Signature Series:**

In collaboration with renowned artists, Engl has developed a range of signature amplifiers tailored to meet the specific sonic requirements of individual players. From the aggressive tones of the Savage SE to the melodic versatility of the Steve Morse Signature, each amplifier in the Signature Series reflects the unique playing style and tonal preferences of its namesake. These amplifiers undergo rigorous testing and refinement to ensure they capture the essence of the artist's sound while offering the reliability and performance expected from Engl products. With features like MIDI compatibility and custom voicings, the Signature Series amplifiers empower players to unleash their creativity on stage and in the studio.

**Conclusion:**

In conclusion, Engl Amps' product range offers a comprehensive selection of amplification solutions designed to cater to the diverse needs of guitarists across different genres and playing styles. From classic tube-driven tones to modern high-gain aggression, Engl amplifiers combine craftsmanship, innovation, and sonic excellence to inspire musicians and elevate their performances. Whether you're a seasoned professional or an aspiring enthusiast, Engl's commitment to quality and reliability ensures that you'll find the perfect amplifier to unleash your musical potential.