It roars, it whistles, it scratches. Whether in the studio, live or with the home surround sound system, you always and everywhere fight against overemphasis, frequency holes and phase problems. Even a trained ear sometimes has to capitulate to the complexity of the frequencies, which ultimately always calls for an analyzer. With the Phonic PAA3X, the Taiwanese manufacturer has a handheld version on the market that can display far more than just frequencies.
The features of the Phonic PAA3X
With the dimensions (H x W x D) 156 mm x 90 mm x 37.5 mm, the Phonic PAA3X is very handy, similar to a hand-held TV from the eighties, with the weight of just over 300 grams after a few minutes can already pull a little on the biceps. Ultimately, the weight and dimensions are really appropriate for the range of services offered.
First, let's look at the Phonic PAA3X's accessories. The product is delivered in a padded synthetic leather bag, which can also be attached to a belt if required. With the supplied 5V power supply, not only the internal battery of the product, but also an iPad / iPhone etc. can be charged due to the 2A output power. A corresponding USB cable is of course also included.
The measuring antenna of the Phonic PAA3X is conveniently parked in an antenna slot inside the housing. It's a bit of fiddling to get them out of there, but the level of detail is still excellent. In order to be able to attach them to a microphone stand, if necessary, a corresponding screw mount and mini-XLR extension cable are also included. On the back of the housing there is also a tripod mount for the analyzer itself. Finally, there is a micro SD card on which display snapshots can be saved for further analysis.
On the underside of the housing there is an XLR input and output for feeding in external sources as a signal source and for outputting the signal from the internal noise generator in the form of sine, sweep, polarity control and, of course, pink noise. For navigating within the menu, four pushbuttons were positioned on the front of the housing, which, in addition to the usual up / down / left / right, also trigger the snapshot of the display. The main navigator, on the other hand, is a rather wobbly wheel with a push function on the left side of the case. In terms of haptics, it is more reminiscent of a volume control on a toy, it could indeed have been made more valuable.
The features of the Phonic PAA3X
The Phonic PAA3X has set itself the goal of displaying the most important acoustic problems as simply and easily as possible. It does not offer a solution in the form of automatic calibration or anything similar. Should e.g. If, for example, the frequency response of a product needs to be corrected, a corresponding external tool in the form of an EQ or similar must also be available.
Well then, what can the Phonic PAA3X do?
1.) Real Time Analyzers
Basically self-explanatory for anyone who has dealt with the subject. The dB range is flexible, so that you can measure up to 130 dB at very low as well as at high volumes. Nothing extraordinary if it weren't for the EQ Setting function. A very nice feature where the analyzer shows which frequency is over-present and which under-present with a 0 dB line placed in the middle by means of a corresponding line up and down. Ideally, a flat line would appear here.
2.) Reverberation measurement
The eternal fight of the FOH against the room acoustics. This RT 60 algorithm measures the time it takes for a signal to drop 60Db. This can be done without filtering (linear weighting) or with an applied filter.
3.) Level meter
Also self-explanatory, if you belong to the pitiful species of the "Noise Police" at the music fairs or the like. A MAX and an RMS display provide information about the current level. The specification can be in dBu, dbV or Voltage.
4.) Polarity
You wouldn't believe how often, even with high-end components, the polarity of the loudspeakers used was simply not set up correctly. This can be checked very quickly by outputting a test tone.
The Phonic PAA3X in action
Of course, most see the application area of the Phonic PAA3X in live sound reinforcement or for the purpose of optimizing monitoring in a control room. Errors can be found quickly, but fixing them can mean a lot more than simply tweaking the 31-band EQ. Unfortunately, spatial misdesigns or unfavorable reflections cannot be solved from the start, but at least you know very quickly where the problem comes from using the Phonic PAA3X.
However, people tend to forget that a mobile analyzer can provide very good service in the rehearsal room, in the home hi-fi system or even inside a car. How often does the bass boom in the rehearsal room for all other instruments up to the stand-up collar, whereby a different positioning of the box or a skilful operation of the graphic EQ means a relief for the colleagues.
Anyone who wants to optimize their vehicle will also be happy with the Phonic PAA3X, provided they are not of the monkey-maker species who make every traffic light stop torture with their bass-heavy Eurobeat droning.
Rarely have I been able to complete an all-round acoustic analysis in such a short time, and without changing the device. A kind of acoustic Swiss army knife. We recommend.
Conclusion
With the Phonic PAA3X, there is a handheld analyzer on the market that lists all the important points in terms of signal flow in no time at all. A clear, self-explanatory menu navigation and some very nice detailed solutions leave a very good impression.
Additional Informations:
Comprehensive Report on Phonic Audio
Introduction: Phonic Audio is a pioneering company in the audio equipment industry, renowned for its innovative designs and cutting-edge technology. This report presents a comprehensive overview of Phonic Audio, including its history, products, market position, technological advancements, and corporate values.
2. Company Background: Phonic Audio was founded in 1977 by a group of passionate audio engineers with the vision of providing high-quality sound equipment to musicians, audio professionals, and consumers worldwide. The company's headquarters are located in Taipei, Taiwan, with regional offices and distribution centers spanning across various continents.
3. Product Range: Phonic Audio offers a diverse array of audio equipment tailored for different applications. Their product range includes:
a) Audio Mixers: Phonic Audio's audio mixers are acclaimed for their versatility, durability, and intuitive controls, catering to both amateur and professional audio engineers.
b) Power Amplifiers: The company's power amplifiers deliver robust and reliable performance, driving speakers with remarkable clarity and efficiency.
c) Loudspeakers: Phonic Audio manufactures a wide selection of loudspeakers, ranging from portable PA systems to high-fidelity studio monitors.
d) Wireless Microphones: Their wireless microphone systems boast exceptional sound quality, robust connectivity, and ease of use, making them ideal for live performances and presentations.
e) Digital Signal Processors (DSP): Phonic Audio's DSP units incorporate advanced signal processing algorithms, enabling precise control over sound parameters and enhancing audio quality.
4. Technological Advancements: One of the cornerstones of Phonic Audio's success is its commitment to research and development. Over the years, the company has continuously invested in cutting-edge technologies, staying at the forefront of audio innovation. Some notable technological advancements by Phonic Audio include:
a) Ultra-High-Frequency Transmission: Phonic Audio developed a groundbreaking wireless transmission technology that operates in the ultra-high-frequency range, significantly reducing interference and signal dropouts.
b) Digital Mixing Consoles: The company introduced feature-rich digital mixing consoles with touch-screen interfaces, providing a seamless user experience and streamlining audio production workflows.
c) Class-D Amplification: Phonic Audio's Class-D amplifiers exhibit exceptional energy efficiency and thermal performance, contributing to reduced power consumption and prolonged product lifespan.
d) Beamforming Technology: Their advanced beamforming technology enables precise sound directionality, ensuring optimal sound coverage in large venues or outdoor events.
5. Market Position and Global Presence: Phonic Audio has gained substantial market recognition and established a formidable global presence. Their products are distributed in more than 50 countries through an extensive network of dealers and partners. The company's commitment to product quality, customer satisfaction, and competitive pricing has contributed significantly to its market success.
6. Corporate Social Responsibility: Phonic Audio is dedicated to conducting business responsibly, demonstrating corporate social responsibility (CSR) through various initiatives. The company actively engages in environmental sustainability efforts, employing eco-friendly manufacturing practices and materials whenever possible. Additionally, they support local communities through charitable contributions and initiatives that promote music education.
7. Awards and Recognition: Phonic Audio's commitment to excellence has not gone unnoticed, as the company has received numerous awards and accolades for their products and innovations. These awards serve as a testament to their industry-leading expertise and dedication to customer satisfaction.
8. Conclusion: In conclusion, Phonic Audio stands as a stalwart in the audio equipment industry, continuously pushing the boundaries of technology and setting new standards for audio quality and performance. With a rich history, a diverse product range, and a global presence, Phonic Audio is poised to shape the future of the audio industry and continue to be a preferred choice for musicians, audio professionals, and consumers alike.
- Comprehensive Report on Audio Analyzers
Introduction: Audio analyzers are powerful tools used to measure and analyze various aspects of audio signals. From testing the performance of audio equipment to ensuring audio quality in different applications, audio analyzers play a crucial role in the audio industry. This report provides an in-depth overview of audio analyzers, their functionalities, applications, types, and significance in the world of audio engineering.
2. Overview of Audio Analyzers: Audio analyzers are electronic instruments designed to assess and quantify various characteristics of audio signals, such as frequency response, distortion, noise, phase, and amplitude. These analyzers utilize advanced signal processing techniques and sophisticated measurement algorithms to provide accurate and reliable data about audio performance.
3. Key Features and Functionalities: Modern audio analyzers come equipped with a range of features and functionalities, including:
a) Frequency Response Analysis: Audio analyzers can measure and display the frequency response of audio equipment and systems, helping to identify and address any irregularities in the frequency range.
b) Total Harmonic Distortion (THD) Measurement: THD analysis allows engineers to quantify the level of distortion introduced by audio components, aiding in the assessment of overall sound quality.
c) Noise Analysis: Audio analyzers can distinguish between different types of noise, such as white noise and pink noise, enabling engineers to pinpoint noise sources and minimize their impact on audio signals.
d) Phase Measurement: Phase analysis helps assess the alignment and coherence of audio signals, ensuring accurate sound reproduction and preventing phase-related issues.
e) Amplitude and Level Measurements: Audio analyzers can accurately measure signal amplitudes, levels, and dynamic range, vital for maintaining consistent audio output.
f) Impedance Analysis: Audio analyzers can measure the impedance of audio devices, aiding in the proper matching of equipment and optimizing performance.
g) Signal Generator Functionality: Some advanced audio analyzers include a built-in signal generator to facilitate testing and calibration of audio systems.
4. Types of Audio Analyzers: Audio analyzers come in various forms, tailored to specific applications:
a) Handheld Audio Analyzers: Portable and battery-powered, handheld audio analyzers are suitable for on-the-spot measurements and troubleshooting in field applications.
b) Benchtop Audio Analyzers: Benchtop models offer higher precision and more comprehensive analysis capabilities, making them ideal for laboratory testing and research.
c) Software-based Audio Analyzers: These analyzers rely on specialized software applications running on computers or mobile devices, providing flexibility and easy upgrades.
5. Applications of Audio Analyzers: Audio analyzers find applications in a wide range of industries and fields, including:
a) Audio Equipment Testing: Manufacturers use audio analyzers to assess the performance of audio equipment, ensuring adherence to industry standards and specifications.
b) Sound System Design and Calibration: Audio engineers use analyzers to design and calibrate sound systems for venues, concerts, theaters, and recording studios, optimizing audio fidelity and coverage.
c) Quality Control in Manufacturing: Audio analyzers play a vital role in quality control during the production of audio devices, guaranteeing consistent and reliable performance.
d) Research and Development: In research settings, audio analyzers aid in studying audio phenomena, developing new technologies, and conducting experiments.
e) Broadcasting and Telecommunications: Audio analyzers are used in broadcasting and telecommunications to verify audio signal integrity and compliance with transmission standards.
6. Significance of Audio Analyzers: Audio analyzers are essential tools that ensure high-quality audio experiences for consumers and professionals alike. By enabling accurate measurements and in-depth analysis of audio signals and equipment, audio analyzers contribute to improved audio performance, reduced technical issues, and enhanced user satisfaction.
7. Conclusion: In conclusion, audio analyzers play a vital role in the world of audio engineering and technology. Their ability to measure and analyze various audio parameters helps maintain audio quality, troubleshoot issues, and ensure optimal performance across a wide range of applications. As technology continues to advance, audio analyzers will remain indispensable tools for audio professionals and enthusiasts striving for superior sound quality and performance.
Montag, 31. Juli 2023
TEST: Phonic PAA3X
Sonntag, 30. Juli 2023
TEST: Peli 1510-000-110
I don't know about you, but I've always had an aversion to trollies. trollies? Yes, exactly, these pull-behind transport solutions with pull-out handles, be it as a simple suitcase or the really tough department, as a shopping bag, like my grandmother used to do, with plastic wheels and blue-green-black -checkered outfit!
Yes I know. The screams echoed into my office about “comfortable”, “back-friendly” and “oh-so-practical” and above all, UNCOOL! Yes, I said it, the wheel-assisted grinding solutions always feel like a butter ride with electric blanket bargains for me.
I still remember too well how, on my DOMAIN tour in 2005, half of the oh-so-tough tour entourage, three formations that are traded under the “Metal” banner, left the Nightliner with partly checkered (!) trollies to Hours later, hitting the inclined headbanger violently around the ears with the heavy metal. What a break in style!
But what if a far-sighted company built a really “cool” trolley that also had highly practical transportation value? In this case, even I could be convinced of the practical equivalent of the roller boxes....
Lo and behold, the American top dog when it comes to plastic cases, the Peli company based in Torrance, California, set out to bring the trolley closer to even a stinker like me.
construction
Like all Peli cases, the case with the extensive product designation 1510-000-110 is made of a special plastic mixture that meets military standards.
The case is considered shockproof, waterproof and resistant to oil and grease. Should you come up with the spontaneous idea of carrying out some fitness-promoting paramilitary exercises on a day-off of your tour to the shawm-like screams of your tour leader, you can take responsibility for all Peli cases in terms of resistance and durability ;-)
Peli cases are characterized by the fact that they are significantly lighter than comparable laminated wood solutions with the same stability, but you should not give in to the illusion that you can achieve heavy-duty resilience with a wall thickness on the level of a cleaning bucket .
With an unladen weight of just under 6 kilograms and external dimensions of 55.9 cm x 36.1 cm x 22.9 cm, the 1510-000-110 is also in a weight class that is relatively easy to master, but which is slightly higher than its visual appearance.
Based on the internal dimensions of 51.4 cm x 28.9 cm x 19.2 cm, you can also see that due to the various bulges and reinforcements, between approx. 4-7 cm are used for the protective cover.
Inside, the case comes with 2 pieces of 6.5 cm thick foam panels and a narrow bottom foam insert. The appropriate bulges for your equipment are cut out of these plates, there are no cut-outs made in advance.
A little tip on the side, the best tool for cutting foam is an electric knife, which is otherwise only used to carve and cut up dead animals! The otherwise rather brittle and uncomfortably yielding foam cuts like butter.
A layer of convoluted foam is embedded in the lid of the case to provide counter-pressure from above. Unfortunately, the foam on the lid of this product from Peli was only clamped, not glued, with the result that, in my opinion, the foam in question detaches too easily from the lid with a slight pull.
Of course you can fix the foam later with Velcro or something similar, but I think a factory pre-installation is appropriate.
The lid is connected to the back of the base with two solid steel cotter pins. After closing, the lid sits perfectly on the base part, with a rubber lip all around ensuring a watertight seal.
Two snap locks ensure a tight-fitting closure, whereby the contents of the case can be additionally secured using two standard padlocks thanks to two metal-reinforced drill holes.
A solid handle, spring-loaded with soft plastic from below, ensures good handling if the case is being carried. An additional small folding handle on the front side ensures vertical transport.
From below, four plastic bulges provide a non-slip contact surface. On closer inspection, however, these bulges turn out to be stacking feet, since they fit exactly into narrow ledges on the top of the lid. Thus, several of these cases can be stacked on top of each other.
Of course, the patented, waterproof pressure equalization valve, which automatically equalizes the pressure, for example during transport by plane, should not be missing. The construction manages to exchange the air molecules, but penetrating water molecules are left out!
Yes, and then, of course, the catch of the review, the telescopic handle and wheels! ;-) Although I have to say at first glance that this construction doesn't have much in common with Grandma's shopping crate.
Two pleasantly smooth-running solid rubber wheels with a diameter of approx. 60 mm ensure low rolling resistance and the necessary suspension due to an optimal degree of rubber hardness.
When not in use, the telescopic handle is embedded under the case along its entire length. This construction is not the telescopic rods commonly used, but a much more torsion-resistant "board" construction, which is secured with a snap fastener on the front side.
OK, that's a serious construction, not that unstable pole-egg dance at drying rack level, which is usually sold as a telescopic construction. I like.
Practice
The practice area is quickly dealt with. The case proves to be absolutely roadworthy and practical in all areas.
The entire construction is extremely torsion-resistant and was not able to record any scratches, deformations or even breakage on the lid and side parts, even after I hopped around wildly.
The case does its job with ease, and you can really feel the great experience of the Peli company in this area. Rarely have I had so much fun transporting an object.
I also have to admit defeat to the "hated" trolley function, the mechanical implementation is too good, along with the above-mentioned simplifications.
Conclusion
All right, all right, I admit defeat! If a trolley has such a successful construction as the Peli 1510-000-110, even I am willing to pull a "small trolley" behind me ;-)
The construction is beyond all doubt in terms of its workmanship and the weight/stability ratio, the product also looks very good and exudes the necessary carelessness that you want from a practical case.
Of course, some users will be put off by the high-end price, but I have no choice but to give the Peli the maximum number of points. Everything is just right here, construction, processing and philosophy.
Anyone who is economically dependent on equipment that works at all times knows that even the best material without the best packaging is only worth half as much, or after the first transport damage, nothing at all!
Additional Informations:
Comprehensive Report on Peli Cases
1. Introduction:
Peli Cases is a renowned company specializing in the design and manufacturing of high-performance protective cases for a wide range of industries and applications. With a history dating back to 1976, the company has established itself as a global leader in providing durable, watertight, dustproof, and crush-resistant cases to protect valuable equipment and gear. This report aims to provide an in-depth overview of Peli Cases, covering its history, product range, design and engineering expertise, key features, global presence, and its impact on various industries.
2. History and Founding:
Peli Cases was founded by Dave Parker in Torrance, California, in 1976. The company initially began as a supplier of lighting equipment to the film and photography industry. Recognizing the need for robust and protective cases to transport delicate lighting gear, Parker designed the first Peli Case, which became an instant success. The positive response to the case's durability and reliability prompted the company to shift its focus entirely to protective case manufacturing, leading to the establishment of Peli Products, Inc.
3. Product Range:
Peli Cases offers an extensive product range that caters to diverse industries and applications. Their cases are available in various sizes, configurations, and materials, ensuring a suitable solution for almost any type of equipment. The company manufactures general-purpose cases, heavy-duty shipping cases, tool cases, camera and photography cases, laptop and tablet cases, medical equipment cases, military-grade cases, and more. Peli's commitment to innovation has also led to the development of specialized product lines, including cases with foam inserts custom-cut to fit specific items perfectly.
4. Design and Engineering Expertise:
One of Peli Cases' key strengths lies in its design and engineering expertise. Their cases are engineered using advanced techniques, such as injection molding and rotational molding, to create seamless, watertight seals that protect against extreme conditions. Peli employs a team of skilled engineers and designers who collaborate closely with customers to develop custom solutions for unique requirements. The company's cases undergo rigorous testing and are designed to meet or exceed military standards, ensuring their reliability in the most demanding environments.
5. Key Features:
Peli Cases are renowned for their exceptional features, which set them apart from standard protective cases. Some of the key features include:
Watertight Seal: Peli Cases are equipped with a patented O-ring gasket that forms a watertight seal, making them completely waterproof even when submerged.
Pressure Equalization Valve: Peli's cases feature an automatic pressure equalization valve that balances interior air pressure while keeping water and dust out.
Crushproof and Impact-Resistant: The rugged construction of Peli Cases provides superior crush and impact resistance, ensuring the safety of valuable equipment during transit or storage.
Chemical and Corrosion Resistance: Peli Cases are resistant to a wide range of chemicals and are highly durable, even in harsh environments.
Stackable Design: The cases come with interlocking ribs and stacking feet, enabling stable and secure stacking when multiple cases are used.
6. Global Presence:
With its headquarters in Torrance, California, Peli Cases has expanded its presence globally. The company has a network of distributors and dealers in numerous countries, allowing customers from different regions to access their products easily. This global outreach has contributed significantly to Peli's reputation as a trusted and reliable brand worldwide.
7. Impact on Various Industries:
Peli Cases have made a profound impact on various industries that rely on the safe transport and storage of sensitive equipment. Industries such as filmmaking, photography, military and defense, aerospace, medical, oil and gas, outdoor and adventure, and emergency services have all benefitted from the protective capabilities of Peli Cases. The use of Peli's cases ensures that expensive and delicate equipment remains intact, reducing the risk of damage and downtime.
8. Conclusion:
Peli Cases' journey from a lighting equipment supplier to a global leader in protective case manufacturing demonstrates its unwavering commitment to providing top-notch products. Through continuous innovation, design excellence, and engineering expertise, Peli Cases has earned the trust and loyalty of customers across various industries. As the company continues to evolve and expand its product offerings, it remains an industry pioneer and a go-to solution for safeguarding valuable equipment and gear in some of the most challenging environments worldwide.
- Comprehensive Report on Flightcases
1. Introduction:
Flightcases are a type of specialized protective cases designed to transport and safeguard delicate and valuable equipment during travel, particularly in the music, entertainment, and touring industries. These cases are known for their robust construction, durable materials, and custom-fit foam interiors that provide secure and shock-absorbent enclosures. This report aims to provide a detailed overview of flightcases, covering their history, design and construction, key features, industry applications, advantages, and their impact on various sectors.
2. History and Evolution:
The concept of flightcases can be traced back to the early 20th century, where wooden crates were used to transport fragile equipment during air travel. However, the modern flightcases as we know them today emerged in the 1960s, with advancements in material technologies. The introduction of laminated plywood and aluminum extrusions revolutionized the construction of these cases, making them lighter, stronger, and more adaptable for various applications.
3. Design and Construction:
Flightcases are designed with durability and practicality in mind. The primary materials used in their construction are high-quality plywood or composite materials, such as ABS (Acrylonitrile Butadiene Styrene) or polypropylene, which offer excellent impact resistance and structural integrity. The cases are reinforced with metal hardware, such as aluminum extrusions, ball corners, handles, and latches, which provide added strength and security.
The interiors of flightcases are lined with custom-cut foam inserts, designed to precisely fit the equipment being transported. This foam serves as a shock-absorbent cushion, protecting the contents from vibrations, impacts, and rough handling during transit. The foam interiors are often designed with removable layers to accommodate various equipment configurations.
4. Key Features:
Flightcases boast several key features that make them the preferred choice for transporting delicate equipment:
Protection: The rugged construction and custom-fit foam interiors provide excellent protection against shocks, vibrations, moisture, and dust.
Portability: Despite their robustness, flightcases are designed to be portable and easy to handle. They often come with built-in wheels and handles for convenient transportation.
Stackability: Flightcases are designed to be stackable, allowing for efficient storage and easy transport of multiple cases at once.
Customization: Flightcases can be customized to fit specific equipment dimensions and configurations, ensuring a perfect fit and maximum protection.
Security: Many flightcases feature reliable locking mechanisms to secure the contents during transport and storage.
5. Industry Applications:
Flightcases find extensive use in a variety of industries, including:
Music and Entertainment: Flightcases are widely used to transport musical instruments, audio equipment, DJ gear, and lighting fixtures for concerts, tours, and events.
Film and Television: Film and TV production crews rely on flightcases to protect cameras, lenses, monitors, and other delicate film equipment during on-location shoots.
Exhibitions and Trade Shows: Flightcases are employed to transport promotional materials, product samples, and exhibition displays to trade shows and events.
Medical and Scientific: Sensitive medical equipment, laboratory instruments, and research tools are safely transported in flightcases to ensure their integrity and accuracy.
Military and Defense: Flightcases are used to transport and protect communication equipment, electronics, and weapons for military operations.
6. Advantages of Flightcases:
The use of flightcases offers numerous advantages:
Damage Prevention: Flightcases significantly reduce the risk of damage to valuable equipment, thus saving costs on repairs or replacements.
Professional Image: For businesses in the entertainment and event industries, the use of flightcases enhances their professional image by demonstrating a commitment to equipment safety and reliability.
Ease of Transport: Flightcases' portability and stackability make them easy to load, unload, and transport between venues, saving time and effort.
Versatility: Flightcases can be customized to fit various types of equipment, providing a versatile solution for diverse applications.
7. Impact on Various Sectors:
The adoption of flightcases has had a profound impact on various sectors. For musicians and touring artists, flightcases ensure that their instruments and equipment remain in optimal condition, allowing them to deliver consistent performances. In the film and TV industry, flightcases protect expensive and sensitive equipment, preventing costly delays due to damage. The medical and scientific fields benefit from the precise transport of delicate instruments, avoiding potential research or treatment disruptions.
8. Conclusion:
Flightcases have emerged as indispensable tools for safeguarding valuable equipment across numerous industries. With their robust construction, custom-fit foam interiors, and user-friendly features, flightcases have revolutionized equipment transportation, ensuring that delicate items reach their destination in perfect condition. The ongoing evolution of flightcase design and materials continues to contribute to enhanced equipment protection and the efficiency of various sectors that rely on these specialized protective cases.
TEST: Peli 1500-004-110
Too many valuable products I have already destroyed in my naive beginner days due to my own loading errors, or worse, handling errors of third parties, or they were so badly scratched, bent or dented that their value or their usability fell into the bottomless pit.
However, one thing has always bothered me when using multi-layer plywood, the construction-conditioned partly massive increase in weight. Depending on the size of the case and the quality of the workmanship, the weight of the packaging exceeds the net weight of the contents many times over, which can cause problems with an appropriate backline.
I remember very well my last European tour, which I completed with my band DOMAIN, and the driver of the nightliner informed us before the start of the tour that our backline exceeded the weight of the double-axle trailer, which can be loaded with several tons, by quite a bit due to our "proper" packaging...
Therefore, the industry has always been looking for a heavy-duty plastic that has a strength comparable to plywood, but is much lighter in weight.
One of the suppliers of such products is the American company Peli, which offers a comprehensive range of products for almost every size of case or case on the market.
For testing, I have a case with the sprawling product designation 1500-004-110.
Construction
Peli boasts the build quality of the American military and certifies its products a shockproof, waterproof and oil / grease repellent construction. Additionally, the manufacturer incorporates a pressure equalization valve due to its strong seal, which is especially necessary in aircraft storage compartments.
The black case comes with internal dimensions of 43.2 cm x 29.0 cm x 15.6 cm, external dimensions of 47.0 cm x 35.7 cm x 17.6 cm and a weight of only 4 kg. The weight is all the more astonishing, as my flightcase briefcase, which was only made of 7 mm plywood and only with small metal corners, already has the same weight and opens up about 50% less storage space.
The Peli case is my massive handle of the brand extra-heavy-duty equipped and has a soft rubber compound on the lower grip surface to increase the grip.
The entire case including the handle has, in contrast to many handles or cases, which I have come across from Far East manufacturing in recent times, no (!) Evaporation of solvents or even plasticizers. Very good! You do not believe what I had partly for stink glands in the last time to the test.....
The case is closed by two combined tilt/snap latches, which give an extremely durable impression. All moving plastic parts are guided over recessed metal pins, just like a standard hinge. This prevents the plastic from losing some of its stability with every movement, similar to a nail that is bent back and forth several times.
Maybe some of you remember the Gibson guitar cases from the eighties, often called "Lenor bottles". They had exactly this problem and inevitably led to the snap locks breaking off over the years.
Metal-reinforced holes were placed to the left and right of the latches, where the Peli can be secured against unauthorized opening with normal padlocks if necessary.
The design of the case has some details that immediately show that a fair amount of experience has been involved in the construction. For example, the rear supports, which hold the case vertically, were shaved off at the sides at an angle of about 70 degrees to simplify folding and still give the case sufficient stability.
Or the fact that when the lid is opened, it comes to a pressure point and can only be moved to full opening with a little force. This prevents the lid from slamming down when the case is open and damaging contents, or the case itself, if it is inadvertently set upright.
To protect the contents of the case from moisture, a rubber lip has been embedded in the lid, which fits flush when the case is closed, thus completely sealing the case.
Nubbed foam was attached to the inside of the lid, but it is only clamped in place and not glued. Personally, I don't consider this concept to be the optimal fastening, since the foam comes off quite easily when pulled slightly downwards. If necessary, however, the whole thing can be quickly fixed with some special glue or even double-sided tape.
A freely configurable floor divider is attached to the transport tray from the factory, which consists of four long and nine short individual elements. These can now be individually assembled by means of Velcro tape for individual compartments of different sizes. A simple and yet very effective solution.
The individual elements are of high quality, covered with a water-repellent synthetic fiber and consist of a flexible plastic/rubber mix on the inside.
Practice
To test the case directly times on its waterproofness, I took it this morning simply with the shower! Long-haired shaggy with equipment case in the bathroom, the facial expression of my wife you should have seen ;-)
But what can I say, neither water nor soap penetrated into the interior of the case, the rubber lips provided a practical seal.
Furthermore, trampoline jumping followed on the edges, the side parts and on the middle of the suitcase. Even though with my 71 kg I'm not exactly one of the massive representatives of my guild, here too no yielding, bending or even breaking could be heard.
The flexible bottom divider allows you to configure the case individually to your personal transport needs. Whether you primarily want to transport microphones, cables, D.I. boxes, strings, bottlenecks, music stands, practice amps, FX pedals, or whatever, I found nothing I couldn't fit in the Peli, provided it didn't exceed the interior dimensions.
Conclusion
The Peli case has convinced me all along the line!
The design is absolutely road-ready, well processed and has very good detail solutions, which suggests a practical orientation.
In addition, the case made of plastic is much lighter than a comparable plywood case and thus already back and gasoline bill.
Whether you are then also willing to pay the, albeit justified, high-end price of the product, everyone must find out for themselves.
Additional Informations:
Comprehensive Report on Peli Cases
1. Introduction:
Peli Cases is a renowned company specializing in the design and manufacturing of high-performance protective cases for a wide range of industries and applications. With a history dating back to 1976, the company has established itself as a global leader in providing durable, watertight, dustproof, and crush-resistant cases to protect valuable equipment and gear. This report aims to provide an in-depth overview of Peli Cases, covering its history, product range, design and engineering expertise, key features, global presence, and its impact on various industries.
2. History and Founding:
Peli Cases was founded by Dave Parker in Torrance, California, in 1976. The company initially began as a supplier of lighting equipment to the film and photography industry. Recognizing the need for robust and protective cases to transport delicate lighting gear, Parker designed the first Peli Case, which became an instant success. The positive response to the case's durability and reliability prompted the company to shift its focus entirely to protective case manufacturing, leading to the establishment of Peli Products, Inc.
3. Product Range:
Peli Cases offers an extensive product range that caters to diverse industries and applications. Their cases are available in various sizes, configurations, and materials, ensuring a suitable solution for almost any type of equipment. The company manufactures general-purpose cases, heavy-duty shipping cases, tool cases, camera and photography cases, laptop and tablet cases, medical equipment cases, military-grade cases, and more. Peli's commitment to innovation has also led to the development of specialized product lines, including cases with foam inserts custom-cut to fit specific items perfectly.
4. Design and Engineering Expertise:
One of Peli Cases' key strengths lies in its design and engineering expertise. Their cases are engineered using advanced techniques, such as injection molding and rotational molding, to create seamless, watertight seals that protect against extreme conditions. Peli employs a team of skilled engineers and designers who collaborate closely with customers to develop custom solutions for unique requirements. The company's cases undergo rigorous testing and are designed to meet or exceed military standards, ensuring their reliability in the most demanding environments.
5. Key Features:
Peli Cases are renowned for their exceptional features, which set them apart from standard protective cases. Some of the key features include:
Watertight Seal: Peli Cases are equipped with a patented O-ring gasket that forms a watertight seal, making them completely waterproof even when submerged.
Pressure Equalization Valve: Peli's cases feature an automatic pressure equalization valve that balances interior air pressure while keeping water and dust out.
Crushproof and Impact-Resistant: The rugged construction of Peli Cases provides superior crush and impact resistance, ensuring the safety of valuable equipment during transit or storage.
Chemical and Corrosion Resistance: Peli Cases are resistant to a wide range of chemicals and are highly durable, even in harsh environments.
Stackable Design: The cases come with interlocking ribs and stacking feet, enabling stable and secure stacking when multiple cases are used.
6. Global Presence:
With its headquarters in Torrance, California, Peli Cases has expanded its presence globally. The company has a network of distributors and dealers in numerous countries, allowing customers from different regions to access their products easily. This global outreach has contributed significantly to Peli's reputation as a trusted and reliable brand worldwide.
7. Impact on Various Industries:
Peli Cases have made a profound impact on various industries that rely on the safe transport and storage of sensitive equipment. Industries such as filmmaking, photography, military and defense, aerospace, medical, oil and gas, outdoor and adventure, and emergency services have all benefitted from the protective capabilities of Peli Cases. The use of Peli's cases ensures that expensive and delicate equipment remains intact, reducing the risk of damage and downtime.
8. Conclusion:
Peli Cases' journey from a lighting equipment supplier to a global leader in protective case manufacturing demonstrates its unwavering commitment to providing top-notch products. Through continuous innovation, design excellence, and engineering expertise, Peli Cases has earned the trust and loyalty of customers across various industries. As the company continues to evolve and expand its product offerings, it remains an industry pioneer and a go-to solution for safeguarding valuable equipment and gear in some of the most challenging environments worldwide.
- Comprehensive Report on Flightcases
1. Introduction:
Flightcases are a type of specialized protective cases designed to transport and safeguard delicate and valuable equipment during travel, particularly in the music, entertainment, and touring industries. These cases are known for their robust construction, durable materials, and custom-fit foam interiors that provide secure and shock-absorbent enclosures. This report aims to provide a detailed overview of flightcases, covering their history, design and construction, key features, industry applications, advantages, and their impact on various sectors.
2. History and Evolution:
The concept of flightcases can be traced back to the early 20th century, where wooden crates were used to transport fragile equipment during air travel. However, the modern flightcases as we know them today emerged in the 1960s, with advancements in material technologies. The introduction of laminated plywood and aluminum extrusions revolutionized the construction of these cases, making them lighter, stronger, and more adaptable for various applications.
3. Design and Construction:
Flightcases are designed with durability and practicality in mind. The primary materials used in their construction are high-quality plywood or composite materials, such as ABS (Acrylonitrile Butadiene Styrene) or polypropylene, which offer excellent impact resistance and structural integrity. The cases are reinforced with metal hardware, such as aluminum extrusions, ball corners, handles, and latches, which provide added strength and security.
The interiors of flightcases are lined with custom-cut foam inserts, designed to precisely fit the equipment being transported. This foam serves as a shock-absorbent cushion, protecting the contents from vibrations, impacts, and rough handling during transit. The foam interiors are often designed with removable layers to accommodate various equipment configurations.
4. Key Features:
Flightcases boast several key features that make them the preferred choice for transporting delicate equipment:
Protection: The rugged construction and custom-fit foam interiors provide excellent protection against shocks, vibrations, moisture, and dust.
Portability: Despite their robustness, flightcases are designed to be portable and easy to handle. They often come with built-in wheels and handles for convenient transportation.
Stackability: Flightcases are designed to be stackable, allowing for efficient storage and easy transport of multiple cases at once.
Customization: Flightcases can be customized to fit specific equipment dimensions and configurations, ensuring a perfect fit and maximum protection.
Security: Many flightcases feature reliable locking mechanisms to secure the contents during transport and storage.
5. Industry Applications:
Flightcases find extensive use in a variety of industries, including:
Music and Entertainment: Flightcases are widely used to transport musical instruments, audio equipment, DJ gear, and lighting fixtures for concerts, tours, and events.
Film and Television: Film and TV production crews rely on flightcases to protect cameras, lenses, monitors, and other delicate film equipment during on-location shoots.
Exhibitions and Trade Shows: Flightcases are employed to transport promotional materials, product samples, and exhibition displays to trade shows and events.
Medical and Scientific: Sensitive medical equipment, laboratory instruments, and research tools are safely transported in flightcases to ensure their integrity and accuracy.
Military and Defense: Flightcases are used to transport and protect communication equipment, electronics, and weapons for military operations.
6. Advantages of Flightcases:
The use of flightcases offers numerous advantages:
Damage Prevention: Flightcases significantly reduce the risk of damage to valuable equipment, thus saving costs on repairs or replacements.
Professional Image: For businesses in the entertainment and event industries, the use of flightcases enhances their professional image by demonstrating a commitment to equipment safety and reliability.
Ease of Transport: Flightcases' portability and stackability make them easy to load, unload, and transport between venues, saving time and effort.
Versatility: Flightcases can be customized to fit various types of equipment, providing a versatile solution for diverse applications.
7. Impact on Various Sectors:
The adoption of flightcases has had a profound impact on various sectors. For musicians and touring artists, flightcases ensure that their instruments and equipment remain in optimal condition, allowing them to deliver consistent performances. In the film and TV industry, flightcases protect expensive and sensitive equipment, preventing costly delays due to damage. The medical and scientific fields benefit from the precise transport of delicate instruments, avoiding potential research or treatment disruptions.
8. Conclusion:
Flightcases have emerged as indispensable tools for safeguarding valuable equipment across numerous industries. With their robust construction, custom-fit foam interiors, and user-friendly features, flightcases have revolutionized equipment transportation, ensuring that delicate items reach their destination in perfect condition. The ongoing evolution of flightcase design and materials continues to contribute to enhanced equipment protection and the efficiency of various sectors that rely on these specialized protective cases.
TEST: Pedaltrain Floorboards
Here, the male tinkering instinct with a penchant for gigantic dimensions lead to sometimes square meter-like board outgrowths, which require their own case, in which otherwise only live mixers from AC/DC are transported. To avoid such excesses, which is particularly due to the excessive cable routing, the company Pedaltrain raised the two-dimensional wooden board to a three-dimensional ramp and a system was born, which offered plenty of space for underground cable routing due to the strut-based frame construction. Simple, but effective.
For the test we have not only a selection of the current Pedaltrain boards, but also 2 power supplies from our own production along with a small detail solution, which has it in itself.
Construction
All effect pedal boards are based on the same concept. A frame made of aluminum is strengthened by cross braces and offers through the slots the possibility to lay the cabling under the board. The former manufacturing from the USA has now also been moved to China, which unfortunately led to losses in the quality of the gig bags. The small weaving errors here and there and the sometimes somewhat lovelessly riveted rubber feet of the boards are not particularly noticeable, the consistently inferior zippers of the bags unfortunately are. Not one that would not display the usual hooking in the corners, here Pedaltrain should definitely improve in my opinion.
The test selection:
Pedaltrain Nano+
Space for 3-5 floor effects
(W x H x D): 45.7 x 12.7 x 3.5 cm
Weight: 0.51 kg
Scope of delivery: gig bag, velcro strap and cable ties
Small, cute, handy and a good playmate for BOSS style effects. The center slot allows the cable routing to be placed under the board, and with the Pedaltrain Volvo (see review below) you can even create a self-sufficient system.
Pedaltrain Metro 20 SC
Space for 5-10 floor effects
(W x H x D): 50.8 x 20.3 x 3.5 cm
Weight: 0.79 kg
Scope of delivery: gig bag, velcro strap and cable ties
Conceptually very similar to the Nano+, however, larger effect pedals in Digitech format or "real" pedals like Wah Wah find their place here. Like the Nano+, both boards do not yet have a bevel due to their small size.
Pedaltrain Classic 2 SC
Space for 10-15 ground effects
(W x H x D): 60.9 x 31.7 x 8.9 cm
Weight: 1,47 kg
Scope of delivery: gig bag, velcro strap and cable ties
With the Pedaltrain Classic 2 SC, we come for the first time in the area that Pedaltrain has applied for a patent, due to the sloping support surface. Due to the height of over 30 cm, 2 small pedals can be mounted one behind the other, which almost doubles the number of effects compared to the previous two models. In order not to perish in the battery swamp, it is at the latest here time to think about an external power supply. Due to the design, it is now possible to mount a narrow multi power supply in the upper area of the board below the struts.
Pedaltrain Novo 24 SC
Space for 10-15 floor effects
(W x H x D): 60.9 x 36.8 x 8.9 cm
Weight: 2.27 kg
Scope of delivery: gig bag, velcro strap and cable ties
From the approach almost identical to the Pedaltrain Classic 2 SC, but due to the height of almost 37 cm on 2 larger pedals find space on the board in a row.
Pedaltrain Powertrain 1250
While in the beginning one was still dependent on third-party manufacturers such as Voodoo Lab, Pedaltrain has now also gone over to offering its own products for this market segment. Of course, the special features of their own designs can be taken into account, such as the low installation height below the struts. The Pedaltrain Powertrain 1250 meets the specified dimensions and can be attached with the bombproof method of screwing in addition to the Velcro variant.
To do this, take the supplied drilling template, get extended threaded screws (be careful, it could be inch thread, try carefully!) and place the power supply in a suitable place. In terms of features, the Pedaltrain Powertrain 1250 is an ornament to its guild. Firstly, the product has a voltage selection between 220 - 240 V, respectively 110 - 120 V. For the internationally touring musician an existential advantage, as I could experience myself recently. Go to Brazil, partly 2 different mains voltages in the same city ...
Furthermore, the Pedaltrain Powertrain 1250 is one of the few power supplies which also provides 18 V DC if required. The corresponding output can even be switched between 18 V, 15 V, 12 V and 9 V at 150 mA. Three additional 9 V outputs at 210 mA each can mimic a weakening 9 V battery in their voltage output by means of a small screwdriver to capture the legendary sound of Eric Johnson. Lastly, we have 4 regular 9 V outputs, which do not exceed 500 mA in their total output. However, since most pedals get by on 100 - 200 mA anyway, this shouldn't be a problem.
Pedaltrain Volto
The highlight of the test setup, however, is a soap mold-like white plastic case and goes by the name Volto. Basically nothing more than a 2000 mA high-capacity battery, it replaces the flood of 9 V batteries in a very slim case that can even be stuck under Nano and Metro 20 boards. Equipped with 2 pieces of 9 V outputs and two daisy-chain cables, theoretically 6 effect pedals can be supplied with sufficient power. At about 200 mA on average, this would mean an average of 10 hrs.
A new charge of the product takes about 6 hours, an appropriate power supply along with a short cable is included with the product. In case of doubt, however, the cigarette lighter of the band bus or the local mobile charger will also do.
Pedaltrain Pedal Booster PBK
What a help a bent piece of sheet metal can be. Short problem description: Two identically high pedals behind each other on the board, you want to switch the rear effect on/off and thereby adjust the potentiometers of the front effect unit or break them off in the worst case. Remedy: The Pedal Booster removes the slant of the board, the On/Off switch is raised, the problem is solved. So simple, so good!
Practice
The practical operation of the boards can be dealt with quickly. They do exactly what they are supposed to do. Thanks to the aluminum construction, the boards are very light and can be transported easily. In terms of workmanship, a little more care could be taken here and there, but let's be honest, with a pedalboard, it doesn't really matter if there is possibly still a weld on the underside.
The included Velcro is neat, however, I personally always prefer the attachment with cable ties. Even the strongest Velcro can jerk loose, for example, when transported upright in the band bus. The gig bags protect the effects very well, but as already mentioned suffer from the below-average zippers.
The two power supplies Pedaltrain Powertrain 1250 and Powertrain Volto leave a very good impression, although one should think again around the corner with the flagship battery Volto. 10 hrs of use means "can", not "must". If you have, for example, a high-quality reverb in FX mode, you may gladly deal with 2-3 hours of operation.
Furthermore, effects in the serial FX loop of your amp, Volto empty, means amp dead! My tip, leave an emergency battery in the effect pedal, pull the power plug in an emergency and bring the show to an end with battery voltage. Furthermore, once the Volto is empty it needs a minimum charge to be able to supply the effects with voltage again during the ongoing charging operation. The Volto is not an iPhone battery!
And last but not least, test if your effects work in daisy chain mode. There are some effects that require their own output, no matter how much mA is behind it, which in turn means that in the worst case you will only have power for 2 effects pedals!
Conclusion
The class leader in terms of effect boards shows many strengths and marginal weaknesses in the current edition. As before, Pedaltrain shines with an innovative concept and fills the gap to a very good sole supplier by upgrading the portfolio with stand-alone power supplies and additional products. The Powertrain 1250 and Volto power supplies show excellent detailed solutions and will quickly become an industry standard in my opinion.
The quality drop in the workmanship caused by the Chinese production should be easily controlled by better final inspection and higher-quality components.
Additional Informations:
Comprehensive Report on Pedaltrain Floorboards
1. Introduction:
Pedaltrain Floorboards is a renowned company specializing in the design and manufacturing of premium quality pedalboards for musicians and guitar enthusiasts. Founded in 2002 by John Chandler in Nashville, Tennessee, the company has since gained a prominent position in the music industry, catering to the needs of professional musicians, hobbyists, and touring artists alike. This report aims to provide a comprehensive overview of Pedaltrain Floorboards, covering its history, product range, design philosophy, manufacturing processes, customer satisfaction, and its impact on the music gear industry.
2. History and Founding:
Pedaltrain Floorboards began as a passion project for John Chandler, an avid guitar player and pedal enthusiast. Dissatisfied with the limited options available in the market at the time, Chandler decided to design his own pedalboard, one that would be lightweight, durable, and versatile. In 2002, he launched Pedaltrain Floorboards with its first product, the PT-1, which quickly gained popularity among musicians due to its innovative design and functionality.
3. Product Range:
Over the years, Pedaltrain has expanded its product range, offering a diverse selection of pedalboards to cater to varying needs and preferences. They offer various models, such as the Classic Series, Novo Series, and Terra Series, each featuring different sizes and configurations. The Classic Series is known for its time-tested, robust design, while the Novo Series incorporates improved features like open-front designs and enhanced cable management. The Terra Series is tailored for professional touring musicians, providing ample space for larger setups. Additionally, Pedaltrain also offers a wide range of accessories, including soft cases, hard cases, and power supply mounting brackets.
4. Design Philosophy:
Pedaltrain Floorboards' design philosophy revolves around three key principles: simplicity, durability, and functionality. Their pedalboards feature minimalist designs, free from unnecessary frills, focusing on providing a solid and reliable platform for guitar pedals. The use of lightweight aircraft-grade aluminum ensures portability without compromising on strength. Their open-frame designs facilitate easy cable routing and organization, reducing the risk of tangling and signal interference. By adhering to these principles, Pedaltrain has set a standard for pedalboard design across the industry.
5. Manufacturing Processes:
Pedaltrain Floorboards prides itself on its commitment to producing high-quality products. The manufacturing process starts with precision-cutting aluminum sheets using computer-controlled machinery to ensure consistency and accuracy. After shaping the pedalboard frames, they go through a rigorous quality control process to detect any imperfections. The pedalboards are then finished with a powder-coated surface, providing a durable and scratch-resistant finish. The attention to detail and high-quality materials contribute to the longevity of Pedaltrain products.
6. Customer Satisfaction:
One of Pedaltrain Floorboards' most significant achievements is its exceptional customer satisfaction. Musicians worldwide have praised the company for its reliable, well-designed, and user-friendly pedalboards. Reviews often highlight the durability and stability of the boards, even during extensive touring and live performances. Pedaltrain's commitment to customer feedback and constant improvements has fostered a loyal and supportive community of users.
7. Impact on the Music Gear Industry:
Pedaltrain Floorboards has played a crucial role in revolutionizing the music gear industry. Their innovative pedalboard designs have set new standards for functionality, ease of use, and portability. The success of their open-frame design has inspired numerous competitors to adopt similar approaches. Moreover, Pedaltrain's dedication to sustainability and ethical manufacturing practices has also encouraged other companies in the industry to prioritize environmental responsibility.
8. Conclusion:
Pedaltrain Floorboards' journey from a passion project to an industry-leading brand showcases the power of innovation, dedication, and a commitment to quality. Through their minimalist and functional pedalboard designs, Pedaltrain has empowered countless musicians worldwide to organize and optimize their pedal setups effectively. As they continue to evolve and expand their product line, Pedaltrain remains a driving force in the music gear industry, consistently raising the bar for pedalboard design and contributing to the enrichment of the music-making experience.
TEST: Pedaltrain Spark
OK, let's start with a little riddle this time. What is it? Few singers, hardly any keyboardists, many bassists and almost every guitarist know the problem of what lies at his feet. No, it is not a particularly strenuous groupie, rather we are talking about the power supply of the personalized pedalboard, which in terms of complexity and problems already fills entire forums worldwide with tons of tips, tricks and sometimes adventurous detailed solutions.
Aware of this, the "Mother-Of-All-Modern-Pedalboards", the American manufacturer Pedaltrain has brought with the Pedaltrain Spark a power supply on en market, which comes up with some very interesting detail solutions. So then, look down and ran to the Tretminen.
the problem
I don't know about you, but I guess that when you have made your first steps on a six-string guitar at the tender age of 12 and up, and the first power chord sounds reasonably clean on the practice amp, you want to know in a second step what strange boxes your personal idols have lying on the floor in front of them.
If you have then finally recognized the difference between Footswitch (amp) and FX pedal, the personal play instinct, usually in the form of a distortion in motion, then maybe a chorus and a delay pedal and off goes the Lucy. And as the Lucy goes off, in no time you have 3 pedals and 4 cables lying in front of you, which push the pedals apart nicely and move to a wild mess. In addition, it has been found that the battery of the delay pedal is already empty after about 3 - 4 hours and one would like to fall back on power supplies in the context of environmental protection.
But since the pedals have different requirements in terms of amperes and possibly volts, now join the above-mentioned cables and pedals 3 more power supplies plus cables and a multi-plug strip, in short, at your feet it looks like hell, in the chaos you constantly run the risk of accidentally pulling out a cable and with each transport in Grandma's former travel case scratch the beautiful pedals and each poti runs the risk of entering the eternal hunting grounds.
Then comes the grand entrance of the first, self-built pedalboard, usually from Grandma's shelf (grandparents usually have a rich supply of musician-compatible craft content), garnished with rubber feet from the hardware store. The result holds the above-mentioned individual items in place, but usually shines through crude detail solutions, low road suitability, a hobby workshop look and due to the press lying against each other board bugs by a latent tendency to hum. Fact, it cannot go on like this.
the solution
Especially the power supply confronts musicians with the same floorboard problems again and again. Even if you can operate the vast majority of effect pedals with a 9V battery and you don't care about the environmental aspect, the lower output voltage of rechargeable batteries and the self-discharge, you can't get around the fact that many pedals have their battery door on the underside of the housing, and once they are permanently installed on the board, the exchange takes a not to be underestimated effort. There are many high-quality multi-voltage power supplies on the market, but they all struggle with the same problem in the form of their dimensions. Such devices often take up the space of 2 pedals on the work surface, which makes the majority of musicians long for a power supply solution below their pedal mines.
This is where the Pedaltrain Spark comes in, which with a height of only 3 cm (width 14.6 cm, depth 8.6 cm) fits under even the smallest pedalboard of domestic manufacture, the Pealboard Nano.
the flounder concept
If you take the Pedaltrain Spark in your hands for the first time, you will notice the comparatively high weight of 1.5 kg, which suggests that the processed toroidal transformer was provided with a decent efficiency. In addition, the product makes a very massive impression, which leads to a not to be underestimated reassurance of the artist due to its range of application.
The Pedaltrain Spark does not have an On/Off switch, only a green LED informs about applied voltage. On the front side is the IEC power plug and a very helpful voltage selector switch (120 / 240 V), which also allows the use abroad such as USA, Japan, South America, etc.. On the opposite side there are five isolated and filtered outputs with currents 2x 500 mA and 3x 100 mA. The maximum output current of the product is 1300 mA, all outputs supply 9V.
The output values correspond to a good practical value, whereby many Boss / Ibanez pedals are already satisfied with 100 mA and the products above in terms of current hunger, such as Line 6 or similar, mostly get by with 500 mA. Nevertheless, one must not conceal that one must accept some restrictions in favor of the excellent dimensions. Due to the extended headroom in terms of dynamics, some boutique pedal manufacturers in particular rely on 12 or even 18V operating voltage, which cannot be covered with the Pedaltrain Spark.
Also proprietary solutions such as AC operation in the style of the old Digitech pedals, which have also gladly sucked once 1.4 amps, are as expected not to be able to stand, but this should not hide the fact that about 80% of all pedals can cope with the above values.
the novelty
Well, nice and flat is the Pedaltrain, but now the Gretchen question, how do I attach the product to, respectively under the board? The actual novelty is so simple that it almost hurts, but in fact none of the previous pedalboard suppliers seemed to be interested in such a concept. To be able to place the Pedaltrain Spark on any board of the Pedaltrain series, you take a metal bracket plus 2 metal screws and screw the power supply from above onto the board, done, out! Exactly as simple as it sounds, it is also .... at first sight ...?
First look? A problem? No problem, but a design feature that could have used a little explanation in the manual. To test the Pedaltrain Spark in the wild, a new Pedaltrain Nano board was included. All is well, all is well, Pedaltrain Spark is screwed in place and .... the power supply slides back and forth underneath the board! Incomprehension spreads among the tester. Wrong dimensions? Monday production? Or incompetence of the tester?
A short phone call with the German sales department brought the solution. I was allowed to join the long line of colleagues who had made the same mistake. The dimensions of the bracket are designed so that on the pedal must already be the Velcro strips on which the retaining bracket is placed. These 2 millimeters make the difference between slippery sliding and bombproof hold. OK, you could have possibly come up with it yourself, but a simple reference in the manual would have been very helpful.
The accessories
In addition to 2 different, patent-pending metal brackets (Americans and their patent mania ;-)) and the necessary installation tools such as screws and Allen wrenches, a rich selection of a total of 10 power cables are included, whereby 2 cables are designed as a 5-way daisy chain variant, to connect several pedals of similar design to one output. With an optimal combination, it would thus be theoretically possible to supply up to 13 pedals with the Pedaltrain Spark with voltage.
ATTENTION, small tip from practice, happened to me during a show at the Wacken Open Air. If you use a daisy chain cable, where not all sockets are used, tape the free sockets, so that the positive pole can not come against ground. In my case, a free cable end came to a metal grid on the stage floor during the show and caused my effects to be turned on and off haphazardly over and over again. This is a joy when you know that millions of viewers were able to experience my cucumber sound due to the parallel running TV live stream.
Practice
Short and sweet, everything is fine! No hum, good workmanship, intelligent concept, quick assembly! Once the system understood, you can mount the Pedaltrain Spark by means of the 2 different metal brackets on each Pedaltrain board within 1 minute. Another highlight, the supplied power cord leads from the diameter exactly between the board feet to the outside direction socket.
Conclusion
With the Pedaltrain Spark, the foorboard pioneer delivers a power supply that shines with a perfect alignment to the factory's own products. Workmanship, concept and detailed solutions are convincing all along the line, but unfortunately cannot explain the reason for the comparatively very high retail price.
Additional Informations:
Comprehensive Report on Pedaltrain Floorboards
1. Introduction:
Pedaltrain Floorboards is a renowned company specializing in the design and manufacturing of premium quality pedalboards for musicians and guitar enthusiasts. Founded in 2002 by John Chandler in Nashville, Tennessee, the company has since gained a prominent position in the music industry, catering to the needs of professional musicians, hobbyists, and touring artists alike. This report aims to provide a comprehensive overview of Pedaltrain Floorboards, covering its history, product range, design philosophy, manufacturing processes, customer satisfaction, and its impact on the music gear industry.
2. History and Founding:
Pedaltrain Floorboards began as a passion project for John Chandler, an avid guitar player and pedal enthusiast. Dissatisfied with the limited options available in the market at the time, Chandler decided to design his own pedalboard, one that would be lightweight, durable, and versatile. In 2002, he launched Pedaltrain Floorboards with its first product, the PT-1, which quickly gained popularity among musicians due to its innovative design and functionality.
3. Product Range:
Over the years, Pedaltrain has expanded its product range, offering a diverse selection of pedalboards to cater to varying needs and preferences. They offer various models, such as the Classic Series, Novo Series, and Terra Series, each featuring different sizes and configurations. The Classic Series is known for its time-tested, robust design, while the Novo Series incorporates improved features like open-front designs and enhanced cable management. The Terra Series is tailored for professional touring musicians, providing ample space for larger setups. Additionally, Pedaltrain also offers a wide range of accessories, including soft cases, hard cases, and power supply mounting brackets.
4. Design Philosophy:
Pedaltrain Floorboards' design philosophy revolves around three key principles: simplicity, durability, and functionality. Their pedalboards feature minimalist designs, free from unnecessary frills, focusing on providing a solid and reliable platform for guitar pedals. The use of lightweight aircraft-grade aluminum ensures portability without compromising on strength. Their open-frame designs facilitate easy cable routing and organization, reducing the risk of tangling and signal interference. By adhering to these principles, Pedaltrain has set a standard for pedalboard design across the industry.
5. Manufacturing Processes:
Pedaltrain Floorboards prides itself on its commitment to producing high-quality products. The manufacturing process starts with precision-cutting aluminum sheets using computer-controlled machinery to ensure consistency and accuracy. After shaping the pedalboard frames, they go through a rigorous quality control process to detect any imperfections. The pedalboards are then finished with a powder-coated surface, providing a durable and scratch-resistant finish. The attention to detail and high-quality materials contribute to the longevity of Pedaltrain products.
6. Customer Satisfaction:
One of Pedaltrain Floorboards' most significant achievements is its exceptional customer satisfaction. Musicians worldwide have praised the company for its reliable, well-designed, and user-friendly pedalboards. Reviews often highlight the durability and stability of the boards, even during extensive touring and live performances. Pedaltrain's commitment to customer feedback and constant improvements has fostered a loyal and supportive community of users.
7. Impact on the Music Gear Industry:
Pedaltrain Floorboards has played a crucial role in revolutionizing the music gear industry. Their innovative pedalboard designs have set new standards for functionality, ease of use, and portability. The success of their open-frame design has inspired numerous competitors to adopt similar approaches. Moreover, Pedaltrain's dedication to sustainability and ethical manufacturing practices has also encouraged other companies in the industry to prioritize environmental responsibility.
8. Conclusion:
Pedaltrain Floorboards' journey from a passion project to an industry-leading brand showcases the power of innovation, dedication, and a commitment to quality. Through their minimalist and functional pedalboard designs, Pedaltrain has empowered countless musicians worldwide to organize and optimize their pedal setups effectively. As they continue to evolve and expand their product line, Pedaltrain remains a driving force in the music gear industry, consistently raising the bar for pedalboard design and contributing to the enrichment of the music-making experience.
Donnerstag, 27. Juli 2023
TEST: Peavey XR 1220
power mixer! Ouch, I can already see the first of them squinting their eyes tightly, while the rest of the pack storms towards the exit of the room, screaming because of their forcibly acquired experiences in the past.
Don't we all know the drama, especially the writer of this article? Hopelessly undersized power amplifiers with 1x 120 watts mono, 4 channels, one of which has cinch inputs, no proper gain control and a 7-band hum equalizer for the already pressureless overall concept? And then please set up the supplied "boxes" at ear height in front of you at a distance of 20 centimeters, so that you have even the slightest chance of asserting yourself against the bass drum alone. An ice-cold shiver runs down my spine, it was horrible, lousy, out of the question!
Alternatively, you could of course choose the slightly more powerful variation from other manufacturers (2x 150 watts - Hoho!), which then switched off at regular intervals of about 30 minutes due to overheating due to the poor ventilation concept when placed in a rack. The good atmosphere at rehearsals and shows was programmed right away, including a refreshing announcement from the organizer... Oh yes, the construction was incredibly heavy and pretty unwieldy, of course!
Due to digital power amplifiers, such power mixer horror scenarios are definitely a thing of the past, at least if you can believe the performance specifications of the Peavey XR 1220 mixer I was testing. 2x 600 watts at 4 ohms speak a clear language and also want to convince in the context of a noisy rock band.
construction
The Peavey XR 1220 is a 20-channel mixer with an internal stereo power amplifier. As is almost always the case with products in this price range, the motto here is "Designed in the USA, assembled in China". Occasionally one wonders whether any product of stage and studio technology is still not built in the same totalitarian state.
In addition to the easier handling compared to a separate construction of mixer and power amplifier, there is also no wiring, which, for example, significantly reduces the assembly time of the product. In general, it is noticeable that the designers have primarily devoted themselves to the "all-in-one" vocal system use, so the product also has a built-in multi-FX unit and a stereo equalizer. Everything together weighs just under 11 kilograms, which used to weigh just one mains transformer of a Peavey CS 800.
In terms of connection technology, the input section runs in the usual way, that is to say XLR, or line input via jack plus loop-in point in front of the catch-up amplifier. Behind the gain controller and a subsonic filter at 80 Hz is a classic three-band tone control (shelving treble +/- 15 dB - 12 kHz), (shelving bass +/- 18 dB - 80 Hz), (bandpass low mids +/- 15 dB - 450 Hz) and a combined two-band high-mid controller, which starts at a reduction of 2 kHz up to - 15 dB and increases the range by 4 kHz up to + 15 dB.
Two pre-fade monitor outs support the live character of the product, followed by the panorama control, a clip LED, a signal LED, a mute switch, a 60 mm fader and a PFL switch. So far, so standard. Channels 19 and 20 manage any stereo signals that may occur, such as keyboards, or feed various stereo lines such as notebooks or MP3 players.
In the total area, greater attention was paid to eliminating any feedback, in accordance with the primary area of application of the product. The mixer has the RTA connection of a measurement microphone. Over two test runs, the mixer, in combination with the test microphone and noise generator, analyzes any feedback loops that may occur and adjusts the equalizer accordingly.
In addition to the standard full-range operation, the product can also be operated as a satellite solution plus an external active woofer or as a double mono full-range plus a passive monitor. Furthermore, the classic active monitor solution is of course possible via the respective sends. A small P.A. can also be connected via two regular XLR outs. be approached while using the internal power amplifier for the operation of the monitors. On the back, the XR 1220 comes with a (tacky) on/off switch, the IEC connector and four Speakon connections (2x left / right each).
Practice
Even if the idea of protecting the environment is commendable, it is impractical to only include the manual as a CD-ROM and not even have a quick-start sheet at the start. If you want to look something up on the spot, you're stuck without a laptop or iPhone. I wonder when you can only look up the manuals on the Internet and the mixer comes with WLAN.
While the power mixer's steel frame leaves a good impression, all the moving components on the surface frankly fail to impress me. While the EQ knobs and the faders do their job with some play in the lateral guidance, but all in all still quite passable, the sliders of the sum equalizer unfortunately work mechanically at the lowest level. Notchy, without guide resistance and equipped with sharp edges, you just want to get the setting over with quickly so that you don’t have to adjust it again if possible. Due to the lack of counters on the housing, the endless controllers in the FX area also fall flat through the grid of mechanical demands.
In terms of sound, the filters operate in the middle segment. With the combined two-way high-mid control, even an inexperienced user can generate a practical sound in just a few simple steps, which can be more advantageous than one might imagine at first glance, especially for singers who are not technically experienced. Anyone who has ever seen an average frontman banging away at the parametric equalizer knows what I'm talking about ;-). Due to the somewhat hard design, the rest is in the midfield in terms of sound, where it delivers average values, but ultimately cannot cause any damage.
Conclusion
With the XR 1220, Peavey delivers a flexible power mixer whose primary area of application was designed for vocal system operation. Because of the powerful power amplifier, the relatively easy handling and the high flexibility, the mixer will find its buyers, although in my opinion some mechanical processing features should be reconsidered.
All in all, the mixer convinces with a good practical value with high performance specifications and due to the production in Google's new enemy China with a low selling price.
Additional Informations:
- Peavey Electronics Corporation - A Comprehensive Company Overview
Introduction: Peavey Electronics Corporation, commonly known as Peavey, is an iconic American manufacturer of musical instruments, audio equipment, and professional sound systems. Founded by Hartley Peavey in 1965, the company has grown from humble beginnings in a small Mississippi basement to become a globally recognized brand in the music industry. With an unwavering commitment to innovation, quality, and affordability, Peavey has consistently delivered products that cater to musicians, sound professionals, and audio enthusiasts alike. This comprehensive report delves into the history, products, contributions, and impact of Peavey in the world of music and sound.
Historical Background: Peavey Electronics Corporation was established in 1965 by Hartley Peavey, a young entrepreneur with a passion for electronics and music. The company's foundation was laid in Meridian, Mississippi, where Hartley started repairing and building audio equipment in his parents' basement. He was determined to create products that were not only exceptional in performance but also accessible to musicians of all levels. This vision became the cornerstone of Peavey's success.
2. Product Line: Peavey offers a diverse range of products that cater to various segments of the music and sound industry. Some of their key product categories include:
2.1 Musical Instruments: Peavey manufactures a wide array of musical instruments, including electric guitars, bass guitars, acoustic guitars, and drums. Their instruments are known for their robust build quality, great playability, and affordability, making them popular choices for both beginners and seasoned musicians.
2.2 Audio Equipment: Peavey's audio equipment division produces a vast range of amplifiers, mixers, speakers, and signal processors. Their amplifiers, in particular, have garnered a reputation for their reliability and power, making them a staple in live sound applications and recording studios.
2.3 Professional Sound Systems: Peavey is also a significant player in the professional sound system market, offering solutions for large-scale events, installations, and concert venues. Their line array systems and loudspeakers are renowned for their performance and clarity.
2.4 Specialty Products: Apart from musical instruments and audio equipment, Peavey has diversified its product offerings to include other items such as lighting systems, microphones, and specialty audio gear, further solidifying its presence in the professional audio industry.
3. Technological Innovations: Peavey's commitment to innovation has been a driving force behind its enduring success. Throughout its history, the company has introduced numerous groundbreaking technologies to the market. One notable example is the "TransTube" technology, introduced in the 1980s. This innovation allowed solid-state amplifiers to emulate the warm and rich tones of tube amplifiers, revolutionizing the guitar amp industry and earning Peavey immense praise from musicians worldwide.
4. Contributions to the Music Industry: Peavey's impact on the music industry extends beyond their products. The company has played a vital role in promoting music education and supporting aspiring musicians. They have actively sponsored various music programs, contests, and events, fostering the growth of musical talent across different genres.
5. Global Reach and Market Presence: Over the years, Peavey has expanded its reach and established a global presence. Their products are sold in numerous countries through a network of authorized dealers and distributors. Additionally, Peavey maintains a strong online presence, making their products accessible to customers worldwide.
6. Endorsements and Artist Relations: Peavey's reputation for producing reliable and quality gear has attracted endorsements from many prominent musicians and bands. Over the years, numerous artists, including renowned guitarists, bassists, and vocalists, have chosen Peavey products as an integral part of their sound.
7. Sustainability Initiatives: Peavey has taken steps to promote sustainability and environmental responsibility in their operations. The company has implemented eco-friendly practices in manufacturing, packaging, and waste management, aiming to reduce their carbon footprint and contribute positively to the environment.
Conclusion: Peavey Electronics Corporation has undoubtedly left an indelible mark on the music and sound industry. From its humble beginnings in a basement to becoming a global leader, Peavey's commitment to innovation, quality, and affordability has resonated with musicians, sound professionals, and audio enthusiasts worldwide. Their diverse product line, technological advancements, and contributions to music education have cemented their position as an iconic and influential player in the world of music and sound. With a legacy of success and a dedication to progress, Peavey continues to shape the industry and inspire musicians for generations to come.
- Power Mixers - A Comprehensive Exploration of a Versatile Audio Solution
Introduction: Power mixers, also known as powered mixers or powered consoles, are an integral component of professional audio systems. Combining the functionalities of a mixer and a power amplifier into a single unit, power mixers offer a convenient and efficient solution for sound reinforcement and audio distribution in a variety of applications. This comprehensive report delves into the features, benefits, applications, and technological advancements of power mixers in the world of audio engineering.
Understanding Power Mixers: A power mixer is a compact and portable audio device that integrates multiple channels of audio inputs, signal processing capabilities, and built-in power amplifiers. Unlike traditional mixers, which require separate power amplifiers to drive speakers, power mixers have the amplifiers integrated within the same unit. This consolidation streamlines the setup process, reduces cable clutter, and simplifies the overall audio system configuration.
2. Features and Functionalities: Power mixers typically include the following features:
2.1 Audio Inputs: Power mixers offer a range of audio inputs, such as XLR, 1/4-inch jacks, RCA connectors, and sometimes digital inputs like USB or Bluetooth. These inputs accommodate various sources, including microphones, instruments, media players, and electronic devices.
2.2 Mixing Capabilities: Power mixers provide multiple channels with individual volume controls, equalization (EQ), and sometimes built-in effects like reverb, delay, or chorus. This allows audio engineers to balance and shape the sound from different sources.
2.3 Power Amplifiers: The integrated power amplifiers in power mixers are specifically designed to match the mixer's output and ensure sufficient power to drive connected speakers. They are rated by wattage per channel, and some models offer bridging options to combine multiple channels for higher output power.
2.4 Speaker Outputs: Power mixers provide speaker outputs, usually in the form of SpeakON or 1/4-inch jacks, allowing direct connection to passive speakers without the need for external amplification.
2.5 Master Controls: Power mixers have master volume controls, main output level adjustments, and sometimes graphic equalizers for fine-tuning the overall sound.
3. Benefits and Advantages: Power mixers offer several advantages that make them a popular choice for various audio applications:
3.1 Portability: Combining a mixer and a power amplifier in a single unit reduces the number of components and cables needed, making power mixers highly portable and ideal for mobile setups.
3.2 Easy Setup: Power mixers streamline the setup process, as users only need to connect audio sources and speakers directly to the mixer without the complexity of external amplifiers.
3.3 Space Efficiency: In space-limited environments, such as small venues or home studios, power mixers save valuable space by combining multiple functionalities into one device.
3.4 Quick and Efficient Sound Reinforcement: Power mixers are perfect for live sound reinforcement applications, such as bands, DJs, public speaking events, and conferences, where a quick setup and ease of use are essential.
4. Applications: Power mixers find applications in a wide range of scenarios, including:
4.1 Live Performances: In live music performances, power mixers serve as the central hub for mixing and amplifying various audio sources, such as microphones, instruments, and playback devices.
4.2 Mobile DJ Setups: DJs often use power mixers for their mobile setups, as they offer an all-in-one solution for mixing music and driving speakers.
4.3 Public Address Systems: Power mixers are common in public address systems used in events, conferences, and presentations, where clear and powerful audio is essential.
4.4 Houses of Worship: Power mixers are utilized in houses of worship for delivering spoken word, music, and other audio content during religious services.
5. Technological Advancements: With advancing technology, power mixers have seen significant improvements in recent years. Digital power mixers now offer advanced signal processing, customizable presets, digital effects, and precise control over every aspect of the audio mix.
6. Conclusion: Power mixers are a versatile and efficient solution for sound reinforcement and audio distribution. Their integration of a mixer and power amplifier in one compact unit simplifies setup and operation, making them popular for a wide range of applications. As technology continues to advance, power mixers are likely to see further enhancements, delivering even more advanced features and capabilities to meet the evolving demands of audio professionals and enthusiasts alike.
TEST: Peavey JD Omniac
My god, how long has the Peavey company been around? That must be decades, since the company around namesake Hartley Peavey was already a household name when I was young. At that time, Peavey had a reputation like Dynacord in this country, i.e. covering the entire product range, from the small suitcase amp to the extensive vocal system. In his time, however, Peavey became known primarily through the sometimes quite extensive backlines of the southern rock combos, which were extremely successful in the States, such as MOLLY HATCHET or 38 SPECIAL. While almost the entire rock landscape in Europe was firmly in the Marshall grip, in the former Confederate strongholds piled up on the stages with hitherto unknown stacks and combos.
The fact that Peavey can now also build first-class guitars and basses is not only known since the collaboration with Eddie van Halen, but the trademark is not directly associated with instrument building, especially in Europe. The two "Godfathers-Of-Electric-Guitar" and their successful nephews in the style of PRS were and are too powerful to give Peavey an international piece of the American cake.
With the JD Omniac, Peavey could earn another bonus point, as the Americans were able to secure Jerry Donahue as an endorser a few years ago. Still traded as an insider tip in Europe, said Mr. Donahue has a veritable reputation in Telecaster circles and was also able to score internationally with the formation "The Hellcasters".
construction
If you look at the instrument for the first time, you need about 1 second to guess the father of the JD-Omniac. Form and concept reveal said Telecaster as a godfather, but without being dismissed as a mere copy. Many details have been tailored to the artist, but are clearly in the tradition of the first industrially manufactured series electric guitar in the world.
The body of the guitar is made of two parts of ash, with a larger main part covering approx. 80% of the body area and a smaller strip taking over the upper area. The body is framed in one piece, opaque high-gloss black on the sides and painted in blueburst on the front and back. Alternatively, the instrument is also available in the colors Sunburst or Vintage Natural.
The neck was screwed to the body with 5 (!) screws countersunk in the body, with a soft rounding of the body below the neck foot significantly increasing the playing comfort in the high registers. The neck was milled from a piece of bird's eye maple and shows clear concessions to the artist. On the one hand, we have a very strongly curved fretboard, which makes playing chords much easier, but at the expense of the string action and an extravagant V-shaping, which might take some getting used to for one or the other.
If you like to use the thumb of the gripping hand to help form chords, this shaping is indeed a very good profile, since the lower part of the V presses exactly into the depression between thumb and forefinger and thus ensures optimal grip. However, those who prefer the thumb-on-the-back-of-the-neck fingering may experience some problems with the shaping. Conclusion: try it!
The scale of the instrument is 25 1/2 inches, while the neck is equipped in Tele tradition with only 21 vintage frets. A Seymour Duncan Jerry Donahue Signature pickup is used in the bridge position and a Custum Seymour Duncan in the neck position. In addition to the three standard configurations in positions 1, 3 and 5, a five-way switch provides a phase reversal in position 2 plus capacitor insert and in position 4 a more "muffled jazz sound". A volume and a tone control round off the electronics.
Another special feature is the bridge construction of the Omniac. Also in the Telecaster tradition, the 2-string per rider construction was implemented, which puts the tradition above the adjustment options. Inheritance or not, with a standard set of strings with non-wound G-strings, flawless octave purity cannot be implemented with this bridge construction! However, the fact that it is made of brass makes up for this, in my opinion, unnecessary commitment to tradition, as the tone of the string also comes across extremely soft and warm due to the relatively soft and heavy metal.
Practice
As soon as you pick up the instrument, you suddenly realize that this is a genuine signature instrument. Why? Well, every artist has a very special relationship with their instrument and secretly wishes for one or the other change to intensify it. Or he (had) an instrument that has these components and may no longer own this instrument, or it is unplayable due to external influences.
If you now go and instruct a manufacturer to produce such an optimized instrument, the result can be unusual, sometimes crude, but rarely pure mainstream. This is also the case with the JD Omniac. Mr. Donahue must have given very detailed specifications, since the general handling and especially the neck shaping set a completely unique direction.
The general trend towards the Telecaster can be felt in every fibre, but not without bringing its own component or improvement into play. In particular, the Seymour Duncan pickups leave an excellent impression. Attack, liveliness and assertiveness are at the highest level and add value to the construction.
Conclusion
Even if the world of electric guitars has drawn attention to itself in recent years, primarily due to a confusing flood of mainstream Chinese copies selling for less than €100, they still exist, the sometimes unknown pearls of the guitar guild , far away from the pure fixation on the fast euro. The Peavey JD Omniac is definitely one of them.
The JD Omniac is an instrument for specialists, which is guaranteed to polarize the user group due to various components such as neck shaping, bridge construction and other small things. However, those who were influenced by the Telecaster in terms of playing technique will know the feeling of "fighting" with their instrument and will certainly develop a more direct approach to the Omniac.
Other guitarists are also encouraged to take a look at the instrument, excellent clean sounds, excellent pickups and very good components make up for the handling that takes some getting used to and dry the tears of the shredder howling attacks about the unexpected incompetence in terms of tone shaping ;-)
The traditional fingerpicker to the country rocker, however, will not want to put the instrument aside, as it has exactly the components that you may have been waiting for years.
Additional Informations:
- Peavey Electronics Corporation - A Comprehensive Company Overview
Introduction: Peavey Electronics Corporation, commonly known as Peavey, is an iconic American manufacturer of musical instruments, audio equipment, and professional sound systems. Founded by Hartley Peavey in 1965, the company has grown from humble beginnings in a small Mississippi basement to become a globally recognized brand in the music industry. With an unwavering commitment to innovation, quality, and affordability, Peavey has consistently delivered products that cater to musicians, sound professionals, and audio enthusiasts alike. This comprehensive report delves into the history, products, contributions, and impact of Peavey in the world of music and sound.
Historical Background: Peavey Electronics Corporation was established in 1965 by Hartley Peavey, a young entrepreneur with a passion for electronics and music. The company's foundation was laid in Meridian, Mississippi, where Hartley started repairing and building audio equipment in his parents' basement. He was determined to create products that were not only exceptional in performance but also accessible to musicians of all levels. This vision became the cornerstone of Peavey's success.
2. Product Line: Peavey offers a diverse range of products that cater to various segments of the music and sound industry. Some of their key product categories include:
2.1 Musical Instruments: Peavey manufactures a wide array of musical instruments, including electric guitars, bass guitars, acoustic guitars, and drums. Their instruments are known for their robust build quality, great playability, and affordability, making them popular choices for both beginners and seasoned musicians.
2.2 Audio Equipment: Peavey's audio equipment division produces a vast range of amplifiers, mixers, speakers, and signal processors. Their amplifiers, in particular, have garnered a reputation for their reliability and power, making them a staple in live sound applications and recording studios.
2.3 Professional Sound Systems: Peavey is also a significant player in the professional sound system market, offering solutions for large-scale events, installations, and concert venues. Their line array systems and loudspeakers are renowned for their performance and clarity.
2.4 Specialty Products: Apart from musical instruments and audio equipment, Peavey has diversified its product offerings to include other items such as lighting systems, microphones, and specialty audio gear, further solidifying its presence in the professional audio industry.
3. Technological Innovations: Peavey's commitment to innovation has been a driving force behind its enduring success. Throughout its history, the company has introduced numerous groundbreaking technologies to the market. One notable example is the "TransTube" technology, introduced in the 1980s. This innovation allowed solid-state amplifiers to emulate the warm and rich tones of tube amplifiers, revolutionizing the guitar amp industry and earning Peavey immense praise from musicians worldwide.
4. Contributions to the Music Industry: Peavey's impact on the music industry extends beyond their products. The company has played a vital role in promoting music education and supporting aspiring musicians. They have actively sponsored various music programs, contests, and events, fostering the growth of musical talent across different genres.
5. Global Reach and Market Presence: Over the years, Peavey has expanded its reach and established a global presence. Their products are sold in numerous countries through a network of authorized dealers and distributors. Additionally, Peavey maintains a strong online presence, making their products accessible to customers worldwide.
6. Endorsements and Artist Relations: Peavey's reputation for producing reliable and quality gear has attracted endorsements from many prominent musicians and bands. Over the years, numerous artists, including renowned guitarists, bassists, and vocalists, have chosen Peavey products as an integral part of their sound.
7. Sustainability Initiatives: Peavey has taken steps to promote sustainability and environmental responsibility in their operations. The company has implemented eco-friendly practices in manufacturing, packaging, and waste management, aiming to reduce their carbon footprint and contribute positively to the environment.
Conclusion: Peavey Electronics Corporation has undoubtedly left an indelible mark on the music and sound industry. From its humble beginnings in a basement to becoming a global leader, Peavey's commitment to innovation, quality, and affordability has resonated with musicians, sound professionals, and audio enthusiasts worldwide. Their diverse product line, technological advancements, and contributions to music education have cemented their position as an iconic and influential player in the world of music and sound. With a legacy of success and a dedication to progress, Peavey continues to shape the industry and inspire musicians for generations to come.
- Hartley Peavey - A Visionary in the Music Industry
Introduction: Hartley Peavey, the founder of Peavey Electronics Corporation, is a pioneering entrepreneur and visionary in the music industry. His journey from a young electronics enthusiast to a renowned leader in manufacturing musical instruments and audio equipment is nothing short of remarkable. This comprehensive report explores the life, accomplishments, and impact of Hartley Peavey on the music industry and his lasting legacy.
Early Life and Passion for Electronics: Hartley Peavey was born on April 18, 1941, in Meridian, Mississippi. From an early age, he showed a keen interest in electronics and music. Growing up in a musical family, he developed a deep appreciation for the art of sound and a curiosity for how audio equipment worked.
2. The Foundation of Peavey Electronics Corporation: In 1965, at the age of 24, Hartley Peavey founded Peavey Electronics Corporation. His vision was to create high-quality, reliable, and affordable audio equipment that would be accessible to musicians at all levels. Armed with determination and an entrepreneurial spirit, Peavey started building and repairing amplifiers in his parents' basement.
3. The TransTube Technology Breakthrough: In the 1980s, Peavey introduced a groundbreaking technology known as "TransTube." This innovation allowed solid-state amplifiers to replicate the warm, harmonic characteristics of tube amplifiers, previously thought to be achievable only with costly vacuum tubes. The TransTube technology revolutionized the guitar amplifier industry, making Peavey amplifiers highly sought after by musicians seeking professional sound at an affordable price.
4. Expanding Product Line and Global Reach: Under Hartley Peavey's leadership, the company expanded its product line to include a wide range of musical instruments, professional sound systems, audio equipment, and specialty gear. Peavey's commitment to innovation and quality resulted in a global presence, with the company's products being sold in numerous countries through a network of authorized dealers and distributors.
5. Contributions to Music Education: Throughout his career, Hartley Peavey has been a strong advocate for music education. He recognized the importance of fostering musical talent and supporting aspiring musicians. Peavey actively sponsored music programs, contests, and events, contributing to the growth of musical education and creativity.
6. Endorsements and Artist Relations: Peavey's dedication to manufacturing reliable and high-quality gear earned the company endorsements from numerous prominent musicians and bands. Renowned guitarists, bassists, vocalists, and other musicians chose Peavey products for their performances, further solidifying the brand's reputation in the music industry.
7. A Legacy of Innovation and Sustainability: Hartley Peavey's emphasis on innovation has been the driving force behind the company's success. He instilled a culture of continuous research and development, pushing the boundaries of audio technology. Additionally, Peavey Electronics Corporation embraced sustainable practices, implementing eco-friendly initiatives in manufacturing, packaging, and waste management.
8. Recognition and Awards: Hartley Peavey's contributions to the music industry have not gone unnoticed. Throughout his career, he received numerous accolades and awards, recognizing his entrepreneurial spirit, innovation, and commitment to music education.
9. Impact on the Music Industry: Hartley Peavey's legacy extends beyond the products of his company. By democratizing access to high-quality audio equipment, he empowered musicians of all levels to achieve professional sound. Peavey's amplifiers, musical instruments, and sound systems have left an indelible mark on stages, studios, and music education institutions worldwide.
10. Conclusion: Hartley Peavey's journey from a young electronics enthusiast to a visionary leader in the music industry is an inspiring tale of passion, innovation, and dedication. His commitment to manufacturing high-quality, affordable audio equipment and promoting music education has transformed the lives of countless musicians and enriched the global music community. As his legacy continues to resonate through Peavey Electronics Corporation, Hartley Peavey's impact on the music industry remains an enduring testament to the power of creativity and entrepreneurship.